Silver Wheel and Tire in Size ST145R12 with Load Range E

Question

Question:

Hello, I’m looking for the above tire and wheel combo in a load range “E” for my 20’ long 4 place enclosed snowmobile trailer. The only option I can find on your site are mounted on aluminum wheels. I would prefer plain painted wheels, preferably grey. Is there an option to order these? Thank you.

asked by: Joe S

0

Expert Reply:

We only have an aluminum wheel with the tire size and Load Range E that you are looking for so your best option would be to get the tire you need with the part # AM10140 and then go with a silver steel wheel like the part # AM20165 and you'd be set.

expert reply by: Jameson C

0

Answer 1

12 x 4 inch trailer wheel #AM20165 does have 10 holes. We have several mod wheels in this size with the 5 on 4-1/2 bolt pattern. Those with 8 holes: #AM20151 #AM20153 #AM20152 Those with 10 holes: #AM20165 #AM20149

view full answer...

Answer 2

We do offer the Taskmaster Steel Modular Trailer Wheel #TA79RR separate from the Wheel and Tire #TA96RR. This will allow you to mount the Load Range B #AM10060 tire on the Wheel #TA79RR. It is best to not mix and match tires when it comes to size…

view full answer...

Answer 3

The Dexstar Steel Mini Mod Trailer Wheel - 12" x 4" Rim - 5 on 4-1/2 - Chrome #AM20152 has no offset or a zero offset. Most trailer wheels are a zero offset. We currently only carry two 12 inche wheels with any offset . The Dexstar…

view full answer...

Answer 4

The trailer wheel you are looking for is the Dexstar Steel Mini Mod Trailer Wheel part #AM20165 which I can confirm using the part number on the attached sticker, "017-366".

view full answer...

Answer 5

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 6

For the LCI52-SB-86.5-68.5, the two ending measurements are: 1st - measurement from hub to hub, meaning the length of the axle in this case is 86.5 inches. 2nd - spring seat dimension where they're welded, meaning the spring seats are 68.5…

view full answer...

Answer 7

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for…

view full answer...

Answer 8

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Answer 9

Brake systems are not dependent on the hub bolt pattern. So you can use the Electric Trailer Brake Kit #AKEBRK-7-SA for 12 inch hub/drums or #AKEBRK-35-SA for 10 inch hub/drums. Then use #10-1-1 wire sold by the foot for your brake magnet wiring.…

view full answer...

Answer 10

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 11

A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…

view full answer...

Answer 12

By "mobile home type bolt pattern" I believe you are talking about a 5 spoke utility bolt pattern such as what is on the Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles #8-174-5UC3. To measure your axle from hub…

view full answer...

Silver Wheel and Tire in Size ST145R12 with Load Range E

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching