Replacement Power Gear Control Panel For a 1996 Fleetwood Discovery

Question

Question:

Will this work on my 1996 FLEETWOOD DISCOVERY?

asked by: Shawn M

0

Expert Reply:

I believe you will need the Replacement Lippert Power Gear Manual Leveling Control Kit # LC359259 for your 1996 Fleetwood Discovery. You will need to remove the control panel to determine if you have the old style wiring connection or the new style which connects to the Replacement Key Pad # LC82FR you found.

expert reply by: Bud M

0

Answer 1

I found an old wiring diagram for your now discontinued Power Gear 500210 control panel and it really helps show how things are supposed to work. There is a red wire running to the three jacks, the dump valve, and the float valve from the solenoid.…

view full answer...

Answer 2

To upgrade from your 500210 Power Gear Touch Pad you will in fact need the Replacement Lippert Components Power Gear Manual Leveling Control Kit #LC359259, which comes with a new touch pad, 8-pin harness and 6-pin harness. A 4-pin harness will not be…

view full answer...

Answer 3

I reached out to my contact at Lippert and he said that it sounds like you have an older Power Gear Manual Leveling kit that had the ground running from the solenoid to the control board. This new kit, part #LC359259, can be used as a replacement but…

view full answer...

Answer 4

The Replacement Lippert Power Gear Manual Leveling Control Kit #LC359259 does replace the control panel/touch pad for a Power Gear manual leveling system. So if you have the Power Gear system, then yes the #LC359259 will take the place of your…

view full answer...

Answer 5

I reached out to my contact at Lippert and he said that both the Keypad 500456 and the 500457 module are obsolete but the Replacement Components Kit #LC359259 will work perfectly to replace both components. This will get your system back up and…

view full answer...

Answer 6

Sounds like the control panel was fried when the dealer messed up the wiring. Only solution will be an all new control panel with the part #LC359259 which we have confirmed fits the now discontinued Power Gear 500210 leveling system.

view full answer...

Answer 7

We had another customer with a '94 Bounder in need of the same control panel for their Lippert Power Gear leveling system and Lippert was able to confirm that kit #LC359259 would work. I shared your photo with my tech contact there and he…

view full answer...

Answer 8

The Replacement Lippert Components Power Gear Manual Leveling Control Kit part #LC359259 is the replacement control panel for your older 500089 control board on your 1999 National. You are correct that the connectors are not the same and it will…

view full answer...

Answer 9

You are correct that the Replacement Key Pad Control Unit for Power Gear Powered RV Leveling System #LC82FR is replacement for your power gear 500731 keypad in your 2004 Holiday Rambler Sceptor per my contact Lippert. Unfortunately I do not have a…

view full answer...

Answer 10

The plug that includes the red wire from the Replacement Lippert Power Gear Manual Leveling Control Kit #LC359259 will plug into the back of the control panel and then the other end will plug into the connector coming off of the pump. The other…

view full answer...

Answer 11

According to Lippert, all of the parts in the kit should be used. There are, however, some wiring changes that have been made at the pump assembly for the system to operate. The 6-pin wiring harness that you are referencing plugs into the back of the…

view full answer...

Answer 12

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...