Replacement Brake Assemblies for Dexter 3,500 lbs Axles

Question

Question:

Hi, I have a Sloan Kwik Load trailer. It has 2 3500lb Dexter axles on it and 14 tires. I would like to replace the brakes. Is this the correct kit? Dexter Electric Trailer Brake Kit - 10" - Left and Right Hand Assemblies - 3,500 lbs Item # 23-26-27

asked by: Ryan C

1

Helpful Expert Reply:

Yes, the Dexter Electric Trailer Brake Kit item # 23-26-27 is the correct replacement brake assemblies for a Dexter 3,500 lbs axle. These have a 4 bolt mounting flange pattern and are compatible with 14" tires.

This kit will replace one of your Dexter 3,500 lbs axles with a set of 10" x 2-1/4" driver's-side and passenger's-side electric trailer brake assemblies.

I have linked an installation video below.

expert reply by: Jerred H

1

Answer 1

Thanks so much for that info and we do indeed have the left hand Dexter electric brake you need for your 3,500 lb axle; I'll also list out the right hand just in case. Based on the info you provided, the correct parts are the following: -…

view full answer...

Answer 2

I really wish there was a way to determine what bearings a trailer needed without actually pulling the wheel off and checking, but there isn't. The only two solution I have for you would be to remove the hubs and get the numbers that are…

view full answer...

Answer 3

Hubs and drums that can be turned (machined) will have a specification on how much they can be turned cast into the metal of the drum somewhere. Otherwise it is at the brake shop's discretion. Drums do not have to be turned unless there is some…

view full answer...

Answer 4

It sounds like your Big Tex trailer did not come with brakes. Based on this, to convert your trailer with no brakes, to adding electric brakes, on your Big Tex 35SA trailer, the first thing you need is a left and right brake kit. You could use the…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 7

To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the #T4071600-500 that you…

view full answer...

Answer 8

Hey Richard, thanks for reaching out! The Dexter DX7.5 Drop-N-Go Brake Actuator #099-175-00 is a great option for a replacement actuator because it's a direct replacement for the common Model 60 actuators that were popular in the '90s.…

view full answer...

Answer 9

Depending on how the trailer was made, there will be a few spots you can check to identify the axle. First, if the trailer was pre-made by a specific company, you may be able to find this information in either the paperwork or on a placard somewhere…

view full answer...

Answer 10

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Answer 11

To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are marked…

view full answer...

Answer 12

In order to verify the spindle dimensions so that you can pick out the correct hub/drum you have to get exact dimensions. For that you need to use a digital caliper like part #PTW80157. For how old your trailer is this is especially important as the…

view full answer...

Replacement Brake Assemblies for Dexter 3,500 lbs Axles

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching