Bearing with 1 Inch Inner Diameter and Race with 1.966 Inch Diameter
Question:
looking for race that is 1.966 an bearing 1inch and spindle nut that fits a 1inch spindle
asked by: Cecil B
Expert Reply:
If you are talking about the inner diameter then the only bearing we have with a 1 inch inner diameter is # L44643. The matching race is # L44610 and it has an outer diameter of 1.980 inches. For a 1 inch spindle nut we have # 165686.
The best way to determine the correct replacement bearings is to go by the inner and outer bearings numbers that are stamped into the metal on the sides of the bearings. Otherwise you would need to measure the spindle using dial or digital calipers for the most accurate measurements you can get. I have included a picture that shows the measurements needed and how the correspond to the bearings and races.
Products Referenced in This Question
Replacement Race for L44643 and L44649 Bearings
- Trailer Bearings Races Seals Caps
- Races
- Standard Races
- 1.980 Inch O.D.
- Bearing L44643
- Bearing L44649
- Race L44610
- 2000 lbs Axle
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L44643
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.000 Inch I.D.
- Bearing L44643
- Race L44610
- 2000 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Shop: Trailer Idler Hub Assembly for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased
- Video: Review of etrailer Trailer Hubs and Drums - Pre Greased Hub - AKIHUB-545-2-LF-2K
- Shop: Dexter Trailer Idler Hub for 2,000-lb and 2,200-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2
- Shop: Trailer Idler Hub Assembly for 2,500-lb Axles - 5 on 4-1/2 - Qty 2
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Shop: Trailer Idler Hub Assembly for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased
- Search Results: dexter 8 259
- Search Results: 3500 hub
- Search Results: 5x4.5
- Search Results: 5 x 4.5
- Video: Dexter Axle Trailer Hubs and Drums - Hub - 8-258BTUC1 Review
- Video: Review of etrailer Trailer Hubs and Drums - Pre Greased Hub - AKIHUB-545-2-LF-1K
- Q&A: Spindle Nut for Use with Trailer Hub # AKIHUB-545-2-LF-2K
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: Idler Hub for 13-Inch Trailer Wheel That Uses L44649 Bearings
- Q&A: What is the Inner Diameter of Trailer Bearings L44649 and L68149
- Q&A: Parts Needed to Go From a 4-Bolt Hub to a 5-Bolt Hub on a Dexter 1,800 lb. Axle
- Q&A: Which Hub fits an Outer Bearing L44649 and Outer Race L44610
- Article: Most Popular Wheel Bearings
- Search Results: axle
- Shop: Trailer Hitch
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Search Results: bearing buddy
- Shop: Trailer Wiring
- Article: Trailer Wiring Diagrams
- Shop: Brake Controller
- Article: Trailer Tire Sizing