Trailer Idler Hub with 5 on 4-1/2 Bolt Pattern that Fits a 1 Inch Diameter Straight Spindle
Question:
Trailer axle, seal and spindle is 1 inch will this fit?
asked by: Ron D
Expert Reply:
To find the right replacement hub for a trailer you will need the inner and outer bearing numbers stamped into the sides of the bearings or the measurements of the spindle to 3 decimal places. The measurements have to be as accurate as possible so I recommend using digital calipers # PTW80157. I included a picture that shows where to measure.
If the spindle diameter is 1 inch the whole length where the bearings ride then hub # AKIHUB-545-35-K will not fit. It takes 2 different bearing sizes with different diameters. There is a bearing that has exactly a 1 inch inner diameter, L44643.
If these are the bearings you have or the spindle is straight with a 1 inch diameter and you need the 5 on 4-1/2 bolt pattern then we have some options. Hub # AKIHUB-545-2-1K is designed for 8 to 12 inch wheels and # AKIHUB-545-2-LF-1K is for 13 to 15 inch wheels. I have linked videos of both hubs.
Products Referenced in This Question
Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44643
- L44643
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Trailer Idler Hub Assembly for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44643
- L44643
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: CE Smith Trailer Wheel Lug Nut - Zinc-Plated Steel - 1/2" - Qty 1
- Shop: Trailer Idler Hub Assembly for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased
- Search Results: lug nuts
- Search Results: lug nut
- Shop: Karrier ST225/75R15 Radial Tire with 15" White Spoke Wheel - 5 on 4-1/2" - Load Range D
- Search Results: trailer hub
- Shop: Trailer Idler Hub Assembly for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased
- Search Results: l44649
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair)
- Shop: 4-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 26" Long
- Video: etrailer Stabilizer Jacks Review
- Q&A: How to Determine Unknown Capacity of Axle
- Q&A: How to Identify Replacement Hub for Trailer
- Search Results: akihub~545~2~lf~1k
- Search Results: spindle nut
- Search Results: nut
- Shop: Trailer Hitch
- Video: Review of CE Smith Trailer Axles - Leaf Spring Suspension - CE33201GA-HUB
- Video: Review of etrailer Trailer Hubs and Drums - Pre Greased Hub - AKIHUB-545-2-LF-1K
- Video: TryRyde Tang Type Replacement Spindle Washer Review
- Q&A: Which etrailer Trailer Hub with 5 on 4-1/2 inch Bolt Pattern Fits 1-1/16 inch Diameter Spindle
- Video: Review of etrailer Trailer Hubs and Drums - Pre Greased Hub - AKIHUB-545-2-LF-2K
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-35-K Review
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: Difference Between EZ Lube Compatible Hubs and Regular Hubs
- Q&A: Parts Needed to Go From a 4-Bolt Hub to a 5-Bolt Hub on a Dexter 1,800 lb. Axle
- Video: Curt Channel-Mount Couple Review
- Q&A: Trailer Hubs Based on Spindle Measurements 3,500 Pound Axles
- Article: Most Popular Wheel Bearings