Recommended Hitch for a 2023 Subaru Crosstrek

Question

Question:

Hello, I am inquiring about a hitch for a 2023 crosstrek 2.0 premium. Your website says the 2018-2022 version does not fit but there are no structural changes between earlier models and the 23. Is it truly not the same fit?

asked by: Jeremy S

0

Expert Reply:

I have a solution that will give you a 2" hitch receiver but there was a redesign that began in the 2018 model year that goes through the 2023 Crosstreks. Structurally it may be the same but there must be something in the way now because none of the hitches that fit the 17 models, like item # C13135 you were looking at, fit the 2018-2023 Subaru Crosstreks.

Instead you will want the EcoHitch Stealth Trailer Hitch Receiver item # 306-X7365. This hitch is confirmed to fit the 2023 Subaru Crosstrek 2.0 Premium. It bolts to your Subaru with included hardware.

I really like this hitch because it installs behind your rear bumper cover. The 2" x 2" receiver is also completely removable which means when you are not towing or hauling an accessory your Crosstrek can have a free the factory look.

I have linked a picture below along with an installation video to show you what the EcoHitch will look like once installed.

If you are planning on towing you will also need a wiring harness item # 118467 and a ball mount kit item # C45534.

expert reply by: Jerred H

0

EcoHitch on a Crosstrek
(click to enlarge)

Answer 1

I did some checking and the etrailer hitch part #e98912 is a confirmed fit for 2020 Subaru Crosstrek. I attached an install video link for this hitch on a similar 2019 Crosstrek as well.

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 7

You can get a replacement mounting hardware kit for your Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C13135 with part #RHK; on the product page you'll put the part number of your hitch (C13135) in the field marked "Hitch…

view full answer...

Answer 8

While we don't carry the Suburban brand of water heaters we do have the Dometic water heater part #DMC74FR which is essentially the same as the Atwood unit you have now and would work great. It's exact same dimensions as what you have now as…

view full answer...

Answer 9

Yes it is; for a 6-gallon tanked RV water heater, there isn't a better option than the Dometic: - Dometic RV Water Heater - Gas and Electric #DMC74FR At 10,000 Btus, this water heater has a higher heating capacity than other units for better…

view full answer...

Answer 10

The correct EcoHitch Trailer Hitch Receiver for a 2012 Subaru Impreza Hatchback is part #306-X7211 just be sure you have the center knock-out panel in the rear bumper fascia. The hatchback and wagon are the same for all intents and purposes regarding…

view full answer...

Answer 11

Both Pro Series cargo carriers can handle the 270 pound snow blower. The difference is that #63153 is 24x60 inches rated for 500 pounds and meant for use in a 2 inch hitch receiver. The #63155 is 20x47 inches rated for 300 pounds and is meant for use…

view full answer...

Recommended Hitch for a 2023 Subaru Crosstrek

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching