Will The Curt A30 5th Wheel Hitch Fit A 2020 Ram 2500 With RamBoxes

Question

Question:

Will this fit a 2020 Ram 2500 that has the factory installed Ram Boxes?

asked by: Raymond N

0

Expert Reply:

The Curt A30 5th Wheel Trailer Hitch for RAM Towing Prep Package # C64BR will fit as long as you have the Ram OEM puck system in the bed of your 2020 Ram 2500.

Since you have RamBoxes you will need to use a rotating pin box along with a wedge kit like # C16992 to prevent the pin box from coming into contact with the RamBoxes.

expert reply by: Kevin C

0

Answer 1

The Mopar 30k hitch you have is the A-Series and the 20k is the Q-Series. Since the A Series is compatible with the Sidewinders you'd just need the wedge part #C16992.

view full answer...

Answer 2

The Curt A30 5th Wheel Trailer Hitch for RAM Towing Prep Package #C64BR only comes with feet that fit into Ram's puck system so without it you wouldn't be able to attach the hitch to the bed of your truck. The Ram puck system is…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion…

view full answer...

Answer 4

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 5

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…

view full answer...

Answer 9

Hey David, from previous customers of ours who have the same 2020 Keystone Raptor 424 we have determined that your pin box style is the Lippert 1621 which means for a Gen-Y gooseneck adapter you'd want the #GY58GR that you referenced.

view full answer...

Answer 10

Beds shorter than 8 foot do commonly need a slider hitch David, but a lot of modern fifth wheel trailers are now made with tapered noses to help and in a lot of cases a slider isn't required. So if the trailer you plan to tow has a tapered nose…

view full answer...

Answer 11

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

view full answer...

Answer 12

If you take a look at the linked diagram you can see the minimum recommended clearance distances between truck and trailer for 5th wheel towing. It is recommended to have at least 5-inches from the top of the bed rails to the bottom of the trailer…

view full answer...

Will The Curt A30 5th Wheel Hitch Fit A 2020 Ram 2500 With RamBoxes

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching