Replacement for 5-Lug Bolt Pattern, 89" Long Axle with 4" Drop and 74" Spring Centers
Question:
springs are 74 apart and the faces of the hubs measure 89. do you have a drop axle that meets these with a 5-lug?
asked by: Pat
0
Expert Reply:
Yes, if sounds like you're looking for the Trailer Axle with Idler Hubs # e72GR or Trailer Axle w/ Electric Brakes # e95SR for your application. These both match the hub-face and spring-center measurements you referenced, they have the 4" drop, and they also use the standard 5 on 4-1/2" bolt pattern you mentioned.
Attached is an installation video of an axle for you to check out!
expert reply by:
Jon G
0
Products Referenced in This Question
Trailer Axle w/ Electric Brakes - 4" Drop - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- Electric Brakes
- 3500 lbs
- 5 on 4-1/2 Inch
- 74 Inch Long
- 89 Inch Long
- Drop - 4 Inch
- etrailer
more information >
Product Page this Question was Asked From
Trailer Axle with Idler Hubs - 4" Drop - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- Idler Hubs
- 3500 lbs
- 5 on 4-1/2 Inch
- 74 Inch Long
- 89 Inch Long
- Drop - 4 Inch
- etrailer
more information >
Continue Researching
- Shop: Dexter Trailer Axle w/ Electric Brakes - 4" Drop - E-Z Lube - 5 on 4-1/2 - 89" - 3.5K
- Shop: Trailer Axle w/ Electric Brakes - 4" Drop - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Shop: Dexter Trailer Axle Beam w/ Idler Hubs - 4" Drop - E-Z Lube - 5 on 4-1/2 - 89" Long - 3.5K
- Shop: Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles - 89" Long - 3,500 lbs
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-3/4 - Pre-Greased
- Shop: Dexter Torflex #10 Axle Side-Mount Frame Installation Hardware Kit
- Video: Review of Dexter Axle Trailer Axles Parts - Torflex Axle Installation Hardware Kit - DX54FR
- Q&A: Does Trailer Hub and Drum Assembly # AKHD-5475-35-K Replace Dexter 3,500 lb Hub
- Q&A: Replacement Axle Option for 92-1/2" Hub Face to Hub Face and 70" From Spring Center to Spring Center
- Q&A: Can the Spring Seats Be Moved on the Dexter 3,500 LB Drop Axle
- Q&A: Can Trailer Brakes be Added to Dexter 3,500 lb Axle with 4 inch Drop
- Shop: Trailer Hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: axle
- Article: Most Popular Wheel Bearings
- Article: Trailer Wiring Diagrams
- Search Results: bearing buddy
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Shop: Trailer Wiring
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Search Results: lug nut
- Shop: Brake Controller
- Article: Trailer Tire Sizing
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Search Results: lug nuts
- Shop: Suspension Enhancement
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Search Results: leaf spring
- Video: etrailer Electric Trailer Brake Kit Installation
Explore Expert Info
![Our Expert]()
on Trailer Suspension Parts
on Trailer Suspension Parts
