Will Yakima PlusNuts Work With The Thule Roof Mounted Top Rack System?

Question

Question:

Does this hardware work with the Thule track system as well?

asked by: Chris

0

Expert Reply:

Yes, you can use the Replacement PlusNut Hardware Kit for Yakima Roof Rack Tracks # Y8880039 in place of the flare nuts for your Thule Roof Mounted Top Rack System # THTB60.

expert reply by: Bryce D

0

Answer 1

We currently offer replacement end caps for two different brands of roof mounted tracks, Yakima part #Y8810103 and Thule part #853-5361. The tracks can be hard to identify and I do know that Thule did produce these for A.R.E. Camper Shells so if…

view full answer...

Answer 2

The Replacement PlusNut Hardware Kit, part #Y8880039 you asked about will work for installing the Yakima 42 inch Tracks part #Y01126, or the Yakima 54 inch Tracks, part #Y01127. I called Yakima and they told me the bolts in the replacement kit are…

view full answer...

Answer 3

You can use either the Yakima 54" tracks #Y01127 or 60" tracks #Y01135 on naked roofs without needing to remove the headliner, and as long as you're careful, you won't damage the headliner during installation. It should be noted…

view full answer...

Answer 4

The only replacement end caps available for the Yakima Roof Rack Track Systems are the Replacement EndCaps #Y8810103. These caps feature a width of just over 1-5/8 inches. If you can tell me the model number of your Yakima tracks, or if they happen…

view full answer...

Answer 5

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Hey Mark, so the correct Blue Ox base plate kit to use with the Blue Ox Ascent tow bar part #BX4375. is the part #BLU53FR. For lighting you can use #C96JR, and not have to worry about cutting into the taillight housing as this plugs inline with the…

view full answer...

Answer 10

Thanks for reaching out, Joe! I recommend using the Rhino-Rack Aero Bar Roof Rack for Camper Shells #Y02-480B which comes with 63" long tracks as well as 54" long crossbars which should give you a little bit of overhang on your canopy. Per…

view full answer...

Answer 11

The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets #RRRCB-RSHB-RJHB as an example. That's the…

view full answer...

Answer 12

In order to attach the Rhino-Rack Pioneer Platform to a set of crossbars you would need the kit that comes with universal mounts which is part #RR42114BF for 48" long x 37" wide or part #RR42115BF for 58" long x 47" wide. This…

view full answer...

Will Yakima PlusNuts Work With The Thule Roof Mounted Top Rack System?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching