Will Replacement Rod and Nut for Ram Jacks fit Big Tex Gooseneck Trailer

Question

Question:

Will Replacement Rod and Nut for etrailer and Ram Square, Direct Weld Jacks - 12K fit my 14K Big Tex 14OT-26GN

asked by: Ty C

0

Expert Reply:

The Replacement Rod and Nut for etrailer and Ram Square, Direct Weld Jacks # TJD-12000-RODNUT would work on your 14K Big Tex 14OT-26GN if the jacks you have are Ram 10k or 12k landing gear style jacks. We don't have a way to know what jacks your trailer would have so we can't verify that.

expert reply by: Jameson C

0

Answer 1

Good news! I was able to get a exploded diagram as well as a set of instructions on how to replace the rod and gears #TJD-12000-RODNUT in the #12000 Series Ram Jacks made after 2012. I have attached them to this page for your convenience. Basically,…

view full answer...

Answer 2

For your 12K Pacific Rim square jack the correct inner tube with drop leg is the part #TJD-12000SP-FIP. This is a direct replacement for the Ram/Pacific Rim 12K trailer jacks like #TJD-12000SP-F2, which are often used as OEM/factory units on newly…

view full answer...

Answer 3

The Ram 12k Jack will use the Replacement Square, Direct Weld Jack Inner Tube with Spring-Return Drop Leg #TJD-12000SP-FIP.

view full answer...

Answer 4

The Replacement Rod, Nut, and Grease Trap #TJD-12000-RODNUT is a fit for the 12000 series of Ram or etrailer jacks such as #TJD-12000SP-R2. It is specifically designed for square, direct-weld TJD-12000 Series jacks; the lift nut will fit 3-1/2"…

view full answer...

Answer 5

Yes, the Replacement Rod and Nut for etrailer and Ram Square, Direct Weld Jacks #TJD-12000-RODNUT does fit your Ram Trailer Jack Model 1200 Series. I have also included a review video for you to check out as well.

view full answer...

Answer 6

We have several replacement parts for the internals of a Ram brand square jack. The Replacement Rod and Nut #TJD-12000-RODNUT will fit the following Ram jacks: #TJD-12000SP-F2 10K Sidewind with 12-3/8 inches of travel w/handle #TJD-12000SP-R2NH 10K…

view full answer...

Answer 7

The Stallion Jack brand is not directly compatible with anything we carry. The closest thing we have is the Replacement Rod and Nut for etrailer and Ram Square, Direct Weld Jacks - 12K #TJD-12000-RODNUT which is 3-1/2 inches x 3-1/2 inches. I…

view full answer...

Answer 8

The Stallion brand of jacks has no relationship to Bulldog products. This was confirmed by my Bulldog contact. It does happen that a product design can be copied by a competitor. This could, theoretically, mean the copycat brand's customers could…

view full answer...

Answer 9

If your rod is 1-1/4" diameter, then it sounds like you have a 12K Bulldog Trailer Jack for which the Replacement Screw and Nut Kit part #BD500217 at 17" long x 1-1/4" diameter most closely resembles the Replacement Rod and Nut Kit…

view full answer...

Answer 10

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 11

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 12

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Will Replacement Rod and Nut for Ram Jacks fit Big Tex Gooseneck Trailer

Product Page this Question was Asked From

Continue Researching