Determining Size of Skid Wheel for Winnebago Aspect 27K

Question

Question:

Is there a way to determine the correct size of skid wheel needed for my unit? I have a 2013 Winnebago Aspect 27K 30, and am wanting to weld skid wheels to the frame, but I am unsure the size. I am also unsure how to determine how far back, or forward they should go

asked by: David W

0

Expert Reply:

We have our skid wheels listed by size relative to the length of the RV but at the end of the day I would go with whatever size you think would work best. In general the longer RVs like over 36 feet call for 6 inch diameter skid wheels like what comes with he Ultra Fab 6 inch wheels part # UF48-979013 which are weld on.

And then for shorter than 34 feet we have the 5 inch diameter setup part # UF48-979012. Since your 2013 Winnebago Aspect 27K is 30 foot I would think the 5 inch setup would give you the best results.

expert reply by: Jameson C

0

Answer 1

The distance from the top of the mounting plate to the bottom of the wheel on the Ultra-Fab 4 Inch Skid Wheels, #UF48-979011, is 5-3/4 inches and for the 6 Inch wheels, #UF48-979013, 7-3/4 inches. I have attached a photo for you showing these…

view full answer...

Answer 2

For your 30 foot 5th wheel I really like the frame mount skid wheels that can swivel. For that the Ultra Fab kit part #UF48-979011 would be your best option. I attached a picture that shows these attached to a trailer frame as well. These don't…

view full answer...

Answer 3

Thank you so much for the info and the pictures! According to my research it looks like your Cummins Onan RV Generator uses a 3/8" NPT Female fitting so you'll need a hose like part #100040-144-MBS. I have attached a link to all of our hose…

view full answer...

Answer 4

You could mount some skid wheels to the frame by your stabilizers to have them hit first and protect the stabilizers and the rest of the undercarriage from scraping when coming out of a steep incline/decline. I recommend ones like the Ultra-Fab Skid…

view full answer...

Answer 5

Yes we do have some rollers available for your 45' RV I recommend the Ultra-Fab Steel Jumbo Roller for Trailers and RVs part #UF48-979023. This is a steel roller versus the lighter duty Ultra-Fab Skid Wheels for Low-Profile RVs up to 30' Long…

view full answer...

Answer 6

There are three ports on the MB Sturgis High Capacity Auto Changeover Regulator 108260. The two 1/4" female inverted flare inlets will attach to the propane tanks with a hose like the MB Sturgis Propane Pigtail part #100575-12-MBS and the single…

view full answer...

Answer 7

Adding skid wheels to your open car trailer is indeed what I recommend to help prevent the trailer from dragging when going up a steep driveway. These are designed specifically for this very purpose and will work well. I recommend taking a look at…

view full answer...

Determining Size of Skid Wheel for Winnebago Aspect 27K

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching