Weight of Hughes Autoformers Voltage Booster with Surge Protection

Question

Question:

what is the shipping weight of the 50 amp Hughes Autoformer?

asked by: Robert F

0

Expert Reply:

The Hughes Autoformers Voltage Booster with Surge Protection part # HU57FR has a shipping weight of around 38 lbs with the actual weight being around 35 lbs.

expert reply by: Conner L

0

Answer 1

Typically when the Quick Level Touch Pad #LC74FR red light flashes it indicates an error and the retract button flashing green it means that the error has been reset. The issue appears to be on the extending, so it's possible that there's…

view full answer...

Answer 2

If your 2019 Forest River RV Rockwood Geo Pro is prewired for a Furrion RV Observation Camera System part #FOS43TASF then there should be a mounting bracket at the top of the trailer in which the camera would just plug into. If this is not the case…

view full answer...

Answer 3

To get power to the controller of your Solera Smart Arm 12V Power RV Awning part #LC759404, you need to tap into an existing circuit, or run a power wire from the battery with an inline fuse holder, and a 15 amp fuse, like part #SWC9538, and part…

view full answer...

Answer 4

We do have awning power switches with four wires in both black and white, the Replacement Switch Kit for Solera Power RV Awnings part #LC285499 for white or part #LC285500 for black. Please note, if your wire colors don't match you will need to…

view full answer...

Answer 5

We actually got a chance to test out a few of our cargo bags, including the Curt #C18211 just the other day. The bag itself measures 56" long x 22" wide x 21" tall. We found it to be extremely roomy we were able to fit about 5 duffel…

view full answer...

Answer 6

The Bulldog 2 Speed Jack part #BD183902 could pretty easily replace a Holland 2 speed jack if that's what your trailer has. This jack has a tubing width of 4 inches like what your jack currently has so the mounting brackets should match up with…

view full answer...

Answer 7

The Kodiak Oil Cap #KPCAP you are looking at is a replacement cap for the Kodiak Pro Lube Kit. The oil cap you need is the Redline Oil Cap, Plug and O-Ring for Dexter 7-9K Trailer Axles #RG04-230. This will replace the oil cap on your trailer axles…

view full answer...

Answer 8

Yes. Using the Hughes Autoformer Voltage Booster with Surge Protection - 50 Amp #HU57FR and the Hardwired Power Watchdog Surge Protector with Bluetooth and Emergency Shut Down - 50 Amp #HU27FR together is possible and provides an extra layer of surge…

view full answer...

Answer 9

I recommend using the Rear View Safety Universal Mirror Monitor #RVS-619N with the Rear View Safety Backup Camera System #RVS-770613-213. This is their larger 7" monitor which will give you a clear view with a color screen.

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...