Replacement Jam Nut With Chrome Cover for Wheel Masters Wheel Liner on 2015 F-53 Fleetwood Storm

Question

Question:

F53 Fleetwood storm 2015 Need jam nut and chrome cover. Holds the chrome beaut rims on. Thanks

asked by: Stephen B

0

Expert Reply:

We have three different options for replacement jam nuts with the chrome cover for Wheel Masters wheel liners. If you can find a part number for your wheel liners I can confirm fitment, or you can match the size to what you currently have. The three options are as follows:

-Replacement Jam Nut # WM9073 for 19F0J-series M14 x 2.0mm

-Replacement Jam Nut # WM9073F for 19F0J-series M14 x 1.5mm

-Replacement Jam Nut # WM9072F 32mm

expert reply by: Robin H

0

Answer 1

The Replacement Jam Nut #WM9072F that you referenced does look similar to the jam nuts that you are currently using to secure your Wheel Masters cover. To determine if they will fit your application though you need to measure your bolt size. This…

view full answer...

Answer 2

I would be happy to help you find the correct lug nut covers for your 2006 Winnebago Sightseer built on the Workhorse chassis, but unfortunately we do not have a breakdown of the specific components your motorhome was outfitted with. Instead you…

view full answer...

Answer 3

The Wheel Masters Lug Nut Covers - Stainless Steel - 1-1/2" #WM8012 that you were looking at are the closest we have to what you are looking for. These are made to fit over 1-1/2" lug nuts, so you can measure your lug nuts to verify…

view full answer...

Answer 4

The Replacement Jam Nut #WM9073F fits the Series 19F0J Wheeliners by WheelMasters and is a M14 x 1.5mm nut. If that is what you have on your 2004 National Tropical Diesel motorhome then yes this will fit. Unfortunately there isn't anything that…

view full answer...

Answer 5

The Replacement Jam Nut #WM9073 referenced in your question is designed to replace those for the Wheel Masters 19J0J series liners. Based on the pictures I was able to pull up of the wheel covers on the 2001 Holiday Rambler motorhomes these do appear…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 9

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

view full answer...

Answer 10

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...