Trailer Hitch Installation - 2012 Chrysler Town and Country - Curt Video

The correct Curt Class II hitch that fits your 2012 Chrysler Town and Country Touring with a 3.6 liter engine is the part #C12264. There isn't any frame modification required to install this hitch on your vehicle. Then for trailer wiring the Curt…

When we installed the Curt hitch part #C12264 on similar 2011 Chrysler Town and Country we found that from the ground to the top of the hitch opening the distance was 11 inches.

We have actually installed both Curt Trailer Hitch Receivers, parts #C12264 and #13364, as well as both Draw-Tite Trailer Hitch Receivers, parts #36455 and #75579, on similar 2012 Chrysler Town and Countrys. Out of all 4 of those choices the…

Between the etrailer #e98855 and the Curt #C13370 Class III trailer hitches for your 2020 Honda Odyssey I do recommend the #e98855 for a couple of reasons. The etrailler #e98855 and the Curt #C13370 are essentially the same hitch except for two key…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…