Correct Replacement Fan Blades and Brackets for 3-Blade AirrForce 42 Hugger Ceiling Fan

Question

Question:

Hello, I have the 2018 artic wolf fifth wheel 315tbh8, and it has the three blade 42” hugger ceiling fan. I’m looking for the replacement fan brackets and blades for it, the fan still runs just need blade components, thank you for your time.

asked by: Joey G

0

Expert Reply:

I was able to confirm that the Replacement Brushed Chrome Brackets for AirrForce RV Ceiling Fan part # 277-000399 and Replacement Blades for AirrForce 42" Hugger Style RV Ceiling Fan part # 277-000398 for cherry/maple or part # 277-94444 for black/villa will also work on the three blade models as well as the four. If you only have three blades you'd just have an extra bracket and blade.

expert reply by: Conner L

0

Answer 1

The holes that mount to the motor for the Replacement Brushed Chrome Brackets for AirrForce RV Ceiling Fan with Light #277-000399 do measure 1-1/2" on center just like what you have. I have attached a photo that has additional measurements…

view full answer...

Answer 2

The Replacement Brushed Chrome Brackets for AirrForce RV Ceiling Fan with Light - Qty 4 #277-000399 does match the 1-1/2" and 3-7/16" measurements provided, so you can use these on your ceiling fan. If you also need new fan blades,…

view full answer...

Answer 3

According to the manufacturer the #277-000399 replacement brackets will probably work for a AirrForce 42" hugger-style 4-blade ceiling fan without a light. They said they believe the same brackets are used for both. Since there is some…

view full answer...

Answer 4

Although we do not have replacement fan blades with those exact measurements, the Replacement Blades for AirrForce 42" Hugger Style RV Ceiling Fan #277-000398 may work for you. These have similar dimensions with a length of 16-5/8" and…

view full answer...

Answer 5

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 6

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 7

The proper replacement inner assembly member for your UFP 34043 would be indeed be the the Dexter #DX99FR which is compatible with disc brakes. The replacement has an electric lock out and has a 7500K capacity and is intended to work with a 2 inch…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 10

We do have the Rhino-Rack Masterkey Lock Barrels #RRRK093-2 which will provide you with 2 new lock cores and keys for your Rhino-Rack Zenith MasterFit Rooftop Cargo Box #RRRMFZ66. As far as pricing goes on the different sets they can change based on…

view full answer...

Answer 11

The Bargman 7-Way, RV-Style Connector #WG54006-043 referenced in your question uses the standard RV-style pin locations for its 7-Way connector. I have attached a diagram of these locations and their functions for you to check out. Wire colors will…

view full answer...

Answer 12

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...