Recommended Truck Bed Mat for a 2022 Nissan Frontier

Question

Question:

Hi Team, looking at this item Im curious to understand how it is a fit for both 5ft and 6 ft beds? Didnt seem like I can pick which length I want.

asked by: Sorten N

0

Expert Reply:

The DeeZee Custom-Fit Truck Bed Mat item # DZ86965 is a universal fit so it will fit both the 5' and 6' bed lengths of your 2022 Nissan Frontier. There are trim lines on the back of the mat to cut it down for a 5' bed.

expert reply by: Jerred H

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 4

We have not had the opportunity to do a brake controller installation on a 2023 Nissan Frontier yet. But if the plug is located in the same place as the 2022 model year, then the plug will be tucked behind the kick plate located to the left of the…

view full answer...

Answer 5

From what I could find, it looks like the plug for a trailer brake controller on your 2023 Nissan Frontier is located in the same location as the 2022 model year. That is behind the side panel by the OBD connector and is likely pushed back into the…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

For your 2018 Ram 2500 with the factory puck system the best 5th Wheel Hitch is the B&W OEM Companion. If you have the 8 foot bed then you will want the fixed 25K #BWRVK3600 and if you have the short 6-1/2 foot bed you will need the 20K Slider…

view full answer...

Answer 8

From what I can find on the 2022 Nissan Frontier, the plug for the brake controller that will let you use a harness like the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers #3050-P is located just above the OBD connector, taped tight…

view full answer...

Answer 9

You ask an interesting question. If your 2017 Jeep Grand Cherokee has the factory-installed trailer sway control (TSC) system already and you are also using a mechanical weight distribution/sway control hitch system I do not recommend adding a third…

view full answer...

Answer 10

The Yakima Replacement T-Bolt with Nut for Yakima Rack and Roll Trailers - Qty 4 #Y8880184 will fit in the channels of your HD bars, but for the most part, crossbar mounted accessories will come with (or have available) T-channel hardware that will…

view full answer...

Answer 11

Since you plan on pushing your 2022 Nissan Frontier to the limits I recommend going with the SumoSprings Solo Custom Helper Springs #SS46EV over the kit #SS96EV simple for the higher 1,800 lb rating. It is important to remember though that these are…

view full answer...

Answer 12

So you will need to access the 12 pin jumper plug in your Frontier's cab, which as you said is on the passenger’s side behind the kick panel. This is where you will install the harness and relays that activate the trailer tow package, and the…

view full answer...

Recommended Truck Bed Mat for a 2022 Nissan Frontier

Product Page this Question was Asked From

Continue Researching