2017 Hyundai Santa Fe Trailer 7-Way Wiring Kit Recommendation for Trailer Lights

Question

Question:

Good morning I want to hook up a 7 pin round connector to my 2017 Hyundai Santa fe but just want to connect the light right now but want to the option of trailer brakes latter my currant trailer has the round connector and I dont want to us adapter what do i need i bouth the hitch from you a couple years ago love the hithcv

asked by: Larry W

0

Expert Reply:

If you already have a 4-Way flat connector like the T-One # 118269 installed on your 2017 Hyundai Santa Fe then I recommend picking up the Universal Installation Kit # ETBC7 which comes with everything you need for a fully-functioning 7-Way. This means that you can just connect the functions that you need for now but then when you want to add the brake controller further on down the road you already have everything right there.

If you want ONLY the 4-Way/7-Way connector then the Hopkins # 37185 is more cost effective and gives you what you're needing.

I also recommend picking up the No-Drill Mount Bracket # C57202 to make it easier to connect your wiring to your hitch receiver.

For a future brake controller I recommend the Curt Echo Under-Dash Wireless Brake Controller # C27JR which connects to the ETBC7 wiring kit using the Pigtail # C51515. The settings on this controller are adjusted via an app on your phone and then you can use the manual override in the app or use the Override Button # C83HR to have a physical button to press.

Attached are some videos for you to check out.

expert reply by: Jon G

0

Answer 1

We have just what you are looking for with the Tekonsha trailer wiring harness part #118812 as this is a plug and play harness that requires only you to run the power wire up to the vehicle battery. The converter box of this kit is the most reliable…

view full answer...

Answer 2

The Tekonsha T-One #118304 and Curt T-Connector #C55580 Vehicle Wiring Harnesses are very similar. These are both custom fit wiring harnesses that include a tail light converter, which is required for your 2007 Toyota Sienna because the brake and…

view full answer...

Answer 3

The only sure way to know if a vehicle came with a tow package is to contact a Hyundai dealer with your VIN. With that info they will be able to tell if your vehicle came with the tow package. If your vehicle came with a factory hitch there is a good…

view full answer...

Answer 4

If you can confirm with your dealership that your 2018 Hyundai Santa Fe Sport 2.0 Turbo AWD DOES have the factory tow package then you will use Curt T-Connector 4-pole harness kit #C56332. But if you don't have it, or if you just don't even…

view full answer...

Answer 5

You will need to start with a 4-way (if you do not have one). For that you would want the #118304. Now to convert the 4-way to a round 6-way you would only need the part #37175. If all you need is trailer light functions this would be all that you…

view full answer...

Answer 6

Both the Tekonsha T-One #118781 and Curt T-Connector #C56382 are custom trailer wiring harnesses confirmed to fit your 2019 Honda Odyssey, but I do recommend the Tekonsha #118781 for a couple reasons. First, the Tekonsha harness does feature a higher…

view full answer...

Answer 7

The towing capacity of the 2014 Hyundai Santa Fe varies depending on the specific engine and transmission in the car and on whether or not the trailer has brakes. Minimum capacity is 1653-lbs for trailers without brakes and the maximum for the manual…

view full answer...

Answer 8

For your 2014 Hyundai Santa Fe the Draw Tite hitch part #75776 is a confirmed fit and will allow you to install the bumper cover back on when you aren't using the hitch. For trailer wiring you'd then want the Curt kit part #C56184 which is a…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 12

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

2017 Hyundai Santa Fe Trailer 7-Way Wiring Kit Recommendation for Trailer Lights

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching