Recommended Trailer Wiring for 2017 Honda Civic Hatchback

Question

Question:

Hi, I need a trailer wiring kit for 2017 honda civic hatchback. Which one should I buy? Thanks.

asked by: Chung T

0

Expert Reply:

For your 2017 Honda Civic Hatchback I recommend the Vehicle Wiring Harness Kit # C59496.

This is the best option since there are no custom wiring kits available for your vehicle.

expert reply by: Robin H

0

Answer 1

While none of the custom trailer hitches are able to fit directly to your 2017 Honda Civic Hatchback with the center exhaust, if you check out the attached photo sent in by a customer you can see that they were able to get the 1-1/4" Curt…

view full answer...

Answer 2

The 75-lbs weight limit for the Malone SeaWing Kayak Carrier and Load Assist w/ Tie-Downs #MPG113MD is the total weight limit that rack can handle (both pieces). Since you mentioned that your Hobie Outback weighs 85-lbs, you're going to want…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion…

view full answer...

Answer 6

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 7

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

The first thing you will need for your 1999 D250 is a 4-way. The Curt T-Connector Vehicle Wiring Harness #C55317 plugs into the connection points behind your rear bumper and will allow you to power your trailer's signal lights. Once the 4-way is…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

I'm happy to say that there is indeed both a trailer hitch and trailer wiring for your 2024 Chevy Trax. The fits for both parts on your '24 Trax are the following: - Curt Trailer Hitch Receiver #C75VV - Tail Light Converter with 4-Pole Flat…

view full answer...

Recommended Trailer Wiring for 2017 Honda Civic Hatchback

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching