Recommended Cover for 2021 Lance 1985 Travel Trailer

Question

Question:

What cover would you recommend for a 2021 Lance travel trailer model 1985.

asked by: Penny S

1

Helpful Expert Reply:

The Adco Olefin HD All-Climate + Wind RV Cover for Travel Trailers part # AD47ZR is what I recommend for a 2021 Lance 1985 Travel Trailer. This is our best all-season cover for use in rain, dirt, wind, and sun. It has zippered panels for entry, weighted buckles for easy installation, and cinch ropes for a tight fit. This is all backed by a three year warranty.

expert reply by: Conner L

1

Answer 1

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 2

The American CS6000XL that you referenced is no longer available and there isn't a direct replacement for it but the closest solution as a replacement would be the Progressive Dynamics RV Control Center part #PD4560K18LS8 which as the same…

view full answer...

Answer 3

Great news Rick. The Firestone Ride-Rite Air Helper Springs #F2609 is compatible with the adaptive ride control on your 2024 GMC Sierra 1500 Denali. You can pair this with the Firestone Air Command #F56VV so you will be able to easily adjust the air…

view full answer...

Answer 4

The recommended lug nut torque for your 7,000lb axle depends on a few factors like wheel size, stud size etc. Check out the attached photo which shows the torque specs for a variety of applications. I see you were looking at the Dexter Nev-R-Adjust…

view full answer...

Answer 5

From the carpeted "floor" to the top of the railing on the 90" x 26" MORryde RV Cargo Sliding Tray #MR87FR measures 3-1/2" (see attached). If you jump to the 3 minute mark of the linked review video you can see where we take…

view full answer...

Answer 6

Since the part #PD4655V has come out and has ability to switch between lithium and lead acid batteries the part PD4655LIV was discontinued. At one point there were separate parts for lithium and lead acid batteries but since the current one can do…

view full answer...

Answer 7

The 26" x 90" dimension for the MORryde Sliding Tray for RV Cargo Compartment - 90" x 26" - 800lbs - 2 Way #MR87FR is the outside dimensions. The internal dimensions of the tray are 22.85" x 88.21".

view full answer...

Answer 8

The Progressive Dynamics Replacement Section #PD4655V does have a jumper to change the charging profile to lithium compatible. You'll simply need to move the black jumper over from the WIZ side to the LI side.

view full answer...

Answer 9

The MORryde Sliding Tray, #MR87FR has inside dimensions of 22.85" x 88.21". Please note the attached image.

view full answer...

Answer 10

Great question Larry, so the current version of the Progressive Dynamics converter #PD4655V does support lithium batteries as-is. At one point it did not but since lithium batteries have become more popular Progressive Dynamics decided to make this…

view full answer...

Answer 11

The current version of the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger #PD4060K does have a switch that allows you to switch to lithium batteries. But this switch didn't get incorporated until 2020. From the picture…

view full answer...

Answer 12

Short answer, yes you can convert from 30amp to 50 amp. It will be costly and require an electrician. Long answer, you will need to replace the power outlet with SmartPlug RV and Marine Power Inlet - 50 Amp - Stainless Steel #SM79FR. Then replace the…

view full answer...

Recommended Cover for 2021 Lance 1985 Travel Trailer

Product Page this Question was Asked From

Continue Researching