Interior Railing Depth for 90" x 26" MORryde RV Cargo Sliding Tray

Question

Question:

What is the interior tray height? That is how high is the lip around the tray?

asked by: Vivian S

0

Expert Reply:

From the carpeted "floor" to the top of the railing on the 90" x 26" MORryde RV Cargo Sliding Tray # MR87FR measures 3-1/2" (see attached).

If you jump to the 3 minute mark of the linked review video you can see where we take this measurement for you!

expert reply by: Jon G

0

Interior Railing Measurement for 90" x 26" MORryde RV Cargo Sliding Tray
(click to enlarge)

Answer 1

Hey Mike as long as your 2018 Primetime Lacrosse has 3 inch diameter axles the Roadmaster Comfort Ride part #RM-2460-2560 is going to fit and work great.

view full answer...

Answer 2

The recommended lug nut torque for your 7,000lb axle depends on a few factors like wheel size, stud size etc. Check out the attached photo which shows the torque specs for a variety of applications. I see you were looking at the Dexter Nev-R-Adjust…

view full answer...

Answer 3

Since the install of the Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers #RM-2460-2560 uses the existing hangers on the trailer for the very front and very back a set wheelbase isn't stated with this kit. Basically…

view full answer...

Answer 4

The Roadmaster Comfort Ride kit part #RM-2460-2560 that was designed for 5,000 lb axles will work great on a trailer that has 4,400 lb axles like you have. The additional capacity beyond what you'd need would not adversely affect ride…

view full answer...

Answer 5

You can back up a trailer with a weight distribution system installed on as long as you don't end up in too tight of a turn. This is especially true with the Curt Weight Distribution System part #C17422 as it has a friction sway control…

view full answer...

Answer 6

We can get your 2022 Forest River R-Pod RP-193 set up with a weight distribution hitch with sway control, and while we don't offer the Recurve, we do have an option that is better, from Fastway: - Fastway e2 Weight Distribution w/ 2-Point…

view full answer...

Answer 7

The tray of the MORryde RV Cargo Sliding Tray #MR93FR has a 1.57" clearance so you will need the Height Adjustment Kit #MR34VR if the cargo compartment lip in your 2022 Grand Design Solitude 390RK-R Fifth Wheel Trailer is taller.

view full answer...

Answer 8

I have to go off the GM dealership recommendation. If they are saying you need the Hydrastar #HBA-CAM or Dexter #DX35FR adapter module for your factory brake controller to work with your electric over hydraulic brake actuator, then I can't really…

view full answer...

Interior Railing Depth for 90" x 26" MORryde RV Cargo Sliding Tray

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching