Can Tow Vehicle with Air Force One Demco be Used with Brakemaster 9000 on Towed Vehicle

Question

Question:

I have a Tiffen RV with an air force one set up. Wil that work with a toad that has a brakemaster 9000 installed?

asked by: Sigurth N

0

Expert Reply:

You'd need to convert either the tow vehicle or the towed vehicle so that both use same system as they are not interchangeable. Since the Air Force One is highly reviewed I would switch to that on the towed vehicle with the # SM99209 which comes with everything you'd install on the toad so you'd be set.

expert reply by: Jameson C

0

Answer 1

I spoke with Roadmaster and unfortunately the Roadmaster BrakeMaster System #RM-9160 and Demco SBS Air Force One Supplemental Braking System #SM99243 are not compatible with each other. You would instead need to install the RoadMaster BrakeMaster…

view full answer...

Answer 2

I think what you are looking for is the RoadMaster BreakAway kit, part #RM-98160. This kit was originally designed to be used for a second vehicle so all you have to do is move the cylinder and brackets. Since you have the bracket and cylinder, and…

view full answer...

Answer 3

I'm going to recommend installing the Demco Stay-IN-Play DUO Supplemental Braking System #DM86VR on your 2008 Jeep Wrangler. You will be able to reuse some of the wiring like the breakaway switch and air lines that tie into the vacuum brake…

view full answer...

Answer 4

Demco does list in the installation manual for the Demco Stay-IN-Play DUO Supplemental Braking System #DM86VR that newer Ford's may need an additional check valve due to Ford using two vacuum lines, but I called my contact at Demco and confirmed…

view full answer...

Answer 5

The folks at JR Products who manufacture the Pressure Pro TPMS systems have confirmed that the #3722SEN sensors would be compatible with the TPMS system used on your Tippin Phaeton as long as the system on your coach is a Bluetooth system that uses…

view full answer...

Answer 6

I have attached a photo of a typical 4-way round connector with the pins labeled you can check out. The photo has both the trailer side and vehicle connectors labeled.

view full answer...

Answer 7

Most of the time the 4-Way connector is wired as follows. Looking at the front of the socket on the vehicle side with the cover raised the top left pole is the yellow, left turn/brake pole, the top right pole is the right turn/brake pole, the bottom…

view full answer...

Answer 8

There is not an industry standard layout for wiring the 4-Way round pin connector, but there is a layout that is most accepted. If you you are looking at the front side of the 4-Way round trailer side plug, the top left prong would be used for right…

view full answer...

Answer 9

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 10

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 11

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 12

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...