Bearing Kit Needed for Light Trailer with 1.250 ID x 1.979OD Grease Seal
Question:
I have a light trailer for a drift boat. 12inch tires. The outside bearing is a 44649 the inside seal is 12194tc 1.250 ID x 1.979OD I didnt pull the seal to get the number off the inside bearing, because I didnt have a replacement seal and I didnt want the trailer out of commission, because the steel head are starting to run. Given this information is there a bearing kit # you could provide me? Thanks.
asked by: Brent C
Expert Reply:
I think that you have a 1" BT8 spindle that uses the Bearing Kit # BK1-100 but I'll need you to double check the bearings that you have for sure. I'm not seeing there are any regular kits that use the L44649 bearing and grease seal with those dimensions but the kit I mentioned above uses L44643 inner and outer bearings plus it has a grease seal matches your specs.
If you can verify your outside bearing as well as your inside bearing I can make sure we get you the right parts.
Product Page this Question was Asked From
Bearing Kit for 1" BT8 Spindle, L44643 Inner/Outer Bearings, 34823 Seal
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44643
- Race L44610
- 2000 lbs Axle
- 2500 lbs Axle
- etrailer
more information >
Continue Researching
- Q&A: Replacement Trailer Hub Seal for TCM 12194TC
- Search Results: 44649
- Search Results: 12194tc
- Shop: Bearing Kit for 1" BT8 Spindle, L44643 Inner/Outer Bearings, 34823 Seal
- Shop: Bearing Kit, L44649 Inner/Outer Bearings, 10-9 Seal
- Shop: BT8 Spindle for 2,000-lb Trailer Axles - 1-1/4" Diameter
- Shop: Double Lip Grease Seal - ID 1.249" / OD 1.983" - Qty 1
- Shop: BT8 Spindle for 2,000-lb Trailer Axles - 1-3/8" Diameter
- Search Results: 25580
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Article: Most Popular Wheel Bearings
- Shop: Trailer Hitch
- Search Results: l44649
- Shop: Grease Seals 10-36 (pair)
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Shop: Trailer Wiring
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Wiring Diagrams
- Shop: Brake Controller
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Search Results: bearing buddy
- Article: Trailer Tire Sizing
- Search Results: 14125a
- Video: etrailer Trailer Idler Hub Assembly Review and Installation
- Shop: Gooseneck Hitch
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Search Results: l68149
- Shop: Suspension Enhancement
- Article: How to Tell the Weight Rating of a Trailer Axle