Will The JR Products RV Blind Knob Fit A 5/16" Spline Crank Shaft

Question

Question:

what size spine shaft does this knob fit 5/16, 3/8? many thanks

asked by: Kathleen M

0

Expert Reply:

I double checked the RV Blind Knob - Black # 37281895 and it fits a 5/16" spline.

expert reply by: Kevin C

0

Answer 1

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 2

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion…

view full answer...

Answer 4

If you take a look at the linked diagram you can see the minimum recommended clearance distances between truck and trailer for 5th wheel towing. It is recommended to have at least 5-inches from the top of the bed rails to the bottom of the trailer…

view full answer...

Answer 5

Some newer cars, vans and small trucks, especially those with large, aftermarket tires, may require the use of Class S chains. Class S tire chains are designed for use on vehicles with restricted wheel well clearance. I have attached a photo that…

view full answer...

Answer 6

Yes, they are if your axles are overslung and the springs sit on top of them. The SumoSprings Trailer Helper Springs for 5-8K Axles item #SS26MV will work with a triple axle set up. They do a great job of absorbing road shock while also working to…

view full answer...

Answer 7

I definitely recommend replacing your 3,500 lb 26 inch leaf springs with the 26 inch 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles #e22YR. The 4,500 lb would be too stiff and your ride would suffer so the better option by far are the 4k…

view full answer...

Answer 8

To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the #T4071600-500 that you…

view full answer...

Answer 9

Thank you for the photo, it was very helpful, and I can confirm that your current B&B city water inlet can be directly replaced with an option from JR Products: - White: RV City Water Inlet with Brass Check Valve - 1/2" MPT #372160-85-A-26A…

view full answer...

Answer 10

I checked with Lippert, who said the correct replacement for your in-wall control panel 17788 is the Replacement INwall My RV Control Panel #LC24HD.

view full answer...

Answer 11

We do not carry those exact parts, though we do have something with the same dimensions that should work for you. Optronics light #MC32RB is red while #MC32AB is amber. I've added links to video reviews of each light for you to take a look at.

view full answer...

Answer 12

Do you mean like a door for the front of the unit?

view full answer...

Will The JR Products RV Blind Knob Fit A 5/16" Spline Crank Shaft

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching