Crossbar Spacing Instructions For The Inno Aero Crossbars On A 2015 Toyota Prius

Question

Question:

What are the distance between crossbars? How/where do we set the front or rear crossbar? Any install diagram with measurements would help. Thank you

asked by: Jeff

0

Expert Reply:

The Inno Aero Crossbars # INXB100-108 with the flush feet # INXS200, with the fit kit # INK865 will need to be mounted:

-15-3/4" from the gap between the front and rear doors, for the rear, &,

-11-3/4" from the gap between the front and rear doors, for the front.

I have included a a diagram depicting these measurement for you to check out as well.

expert reply by: Bryce D

0

Mounting Instructions Inno Aero Crossbars 2010-Current Toytota Prius
(click to enlarge)

Answer 1

What I can say is, yes the Rhino-Rack ROC25 Roof Rack for Naked Roofs #RR44SR will fit great with your 2015 Toyota Prius with a sunroof. However, In order to make sure that this will work with your sunroof I recommend measuring the highest point of…

view full answer...

Answer 2

The Inno aero roof rack that you are referring to includes InnoAero Crossbars - Aluminum - Black - 51" Long and 54" Long #INXB130-138, Inno Through Feet #INXS250, and Custom Fit Kit #INK865. This system is indeed locking; it secures the…

view full answer...

Answer 3

As far as the fitment of the Inno Shadow 16 Cargo Box #INBRA1210BK being able to clamp around a Rhino-Rack roof rack, it depends on what type of Rhino-Rack crossbars you have on your 2013 Toyota Prius. If you have an aero crossbar system that…

view full answer...

Answer 4

I'll be happy to help you out with the installation of the Inno parts (listed below) on your 2014 Toyota Prius v: 42" Aero Crossbars - #INXB108-2 Flush Feet - #INXS200 Fit Kit - #INK870 For the front crossbar you will space the feet out at…

view full answer...

Answer 5

I am glad you guys found my answer helpful! You have two options, you can either go with an aero shaped crossbar roof rack or go with a fairing. I believe your best option would be the Inno roof rack part #INXB100-108, #INXS200, and #INK593 that is…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 8

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 9

The Malone Universal Crossbar System #MPG201 is a more economical choice but it still does a good job. The design and quality of Thule's system is why they have such a large difference in price. Whether you go with the Thule Crossroads system…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

The Rhino-Rack Roof Rack for Factory Tracks #Y02-490B-NT is going to be your best bet for the tracks on the ARE topper for your 2012 Toyota Tacoma. The weight capacity is 220 lbs like you mentioned, but that's going to be the highest you'll…

view full answer...

Answer 12

Thanks for all the details! We definitely have a way to get a cargo basket and an awning installed on your 2024 Toyota Highlander, although the aftermarket roof rack systems will use a clamping system with your door jambs instead of mounting via…

view full answer...