Comparing Trailer Idler Hub Assembly for 3,500-lb Axles AKIHUB-545-35-K and AKIHUB-545
Question:
Looking for info on Item # AKIHUB-545-35-EZ-K versus Item # AKIHUB-545-35-K
asked by: Patrick G
0
Expert Reply:
The only difference between the Trailer Idler Hub Assembly for 3,500-lb Axles part # AKIHUB-545-35-K and part # AKIHUB-545-35-EZ-K is that the latter is for axles with grease zerks in the end of the spindles i.e. EZ-Lube.
The Bearing Buddy Bearing Protectors part # BB1980A are not compatible with spindles that have grease zerks in the ends.
expert reply by:
Conner L
0
Products Referenced in This Question
Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Bearing Buddy Bearing Protectors - Model 1980A w/ Auto Check - Chrome Plated (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 1.98 Inch
- Bearing Buddy
more information >
Product Page this Question was Asked From
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-35-EZ-K Review
- Video: etrailer Trailer Idler Hub Assembly Installation
- Q&A: Spindle and Trailer Idler Hub For 2,000LB Trailer With 15", 5 On 4-1/2" Bolt Pattern Wheels
- Q&A: Do Bearing Buddies Work Well on Travel Trailer Hubs
- Q&A: Do Trailer Wheel Bearings Need Repacking if Bearing Buddy Bearing Protectors Are Used
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Easy Grease Trailer Idler Hub for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5-1/2 - Pre-Greased
- Shop: Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 95" Long - 3,500 lbs
- Video: Dexter Axle Trailer Hubs and Drums - Hub - 8-259-5UC1-EZ Review
- Video: Review of CE Smith Trailer Hubs and Drums - Idler Hub - CE13515
- Video: Review of Dexter Trailer Hubs and Drums - Pre-Greased Trailer Idler Hub Assembly - 84545UC1-EZ
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-35-G-EZ-K Review
- Q&A: How to Determine if Trailer has 84 Spindle to Pick Out Replacement
- Q&A: Trailer Axle Weight Rating for 2 Inch Square Axle
- Search Results: 1.5 spindle
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Video: CE Smith Trailer Fenders CE26098G-2 Review
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Search Results: 44649
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Search Results: 68149
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Trailer Suspension Hanger Kit for Slipper Springs and 38 inch Wheelbase
- Shop: Trailer Wiring
- Shop: Fifth Wheel Hitch
- Search Results: 25580