Which Tow Dolly Straps Do I Need For My 2018 Toyota Corolla With P225/45R17 Tires?

Question

Question:

We have a Demco SS dolly towing a Toyota Corolla hatchback with P225/45R17 90V tires Which strap do we purchase? DM03528 or DM 03528-81?

asked by: Mary H

0

Expert Reply:

For your Demco Kar Kaddy SS Tow Dolly # DM9713045 towing your 2018 Toyota Corolla using P225/45R17 tires, you're going to want to use the:

-Replacement 3-Point Standard Wheel Tie-Down Strap for Demco Tow Dollies # DM03528.

Attached are a couple of product videos for you to check out as well.

expert reply by: Bryce D

0

Answer 1

Your best bet for a tow dolly that can handle your 2020 Chrysler Voyager is the Demco Kar Kaddy X Tow Dolly w/ Disc Brakes - Tilt Bed Frame - 4,800 lbs - Wide Tread #DM9713093. In order to find if this will work for your vehicle you are going to need…

view full answer...

Answer 2

The correct strap for the 215/55R17 tires on your 2018 Volkswagen Passat for a Demco tow dolly, like the Kar Kaddy SS #DM9713045, is the standard size #DM03528. Attached is a review video for you to check out.

view full answer...

Answer 3

The correct size wheel strap for 225/50-16 tires on a Demco tow dolly is the Replacement 3-Point Standard Wheel Tie-Down Strap for Demco Tow Dollies part #DM03528.

view full answer...

Answer 4

The curb weight on your 2021 Honda Odyssey is between 4300 and 4600-lbs depending on your trim package, so I recommend using the Demco Kar Kaddy X Tow Dolly w/ Disc Brakes - Tilt Bed Frame - 4,800 lbs - Wide Tread #DM9713093. The Kar Kaddy X comes…

view full answer...

Answer 5

Only certain B&W Companion 5th wheel trailer hitches are compatible with Sidewinder pin boxes like the RP61412. Basically if it is a Companion that mounts in the 4 pucks of a factory prep package then it can be used with a Sidewinder. But if the…

view full answer...

Answer 6

If you are looking for the quietest possible ride I would recommend you go with a Reese Select Fifth Wheel hitch like part #RP30081. I recently spoke to my contact at Reese and asked which would be quieter the Titan or the Select and he said the…

view full answer...

Answer 7

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 8

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 9

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 12

Brake systems are not dependent on the hub bolt pattern. So you can use the Electric Trailer Brake Kit #AKEBRK-7-SA for 12 inch hub/drums or #AKEBRK-35-SA for 10 inch hub/drums. Then use #10-1-1 wire sold by the foot for your brake magnet wiring.…

view full answer...