Trailer Wiring Harness Recommendation for a 2022 Chevy Bolt EV

Question

Question:

Does the wiring kit for the Chevy Bolt EUV TK87VR also fit the Bolt EV? They are nearly the same drivetrain and dashboard, so perhaps it does?

asked by: Henry H

0

Expert Reply:

The correct wiring harness for your 2022 Chevy Bolt EV will need to be a splice-in wiring kit as there no plug-in kits
.
For your EV the correct harness is part # 119250KIT.

expert reply by: Jon G

0

Answer 1

Yes, the Curt Upgraded Circuit Protected Powered Tail Light Converter w Hardwire Kit and Tester - 4-Pole Flat #C59496 does fit the 2022 Chevy Bolt EUV.

view full answer...

Answer 2

I took a look at the instructions for the Curt Trailer Hitch Receiver item #C38DR. The piece of the fascia you are cutting into is behind the panel the third brake light is attached to. There is a gap behind it where the hitch will protrude from but…

view full answer...

Answer 3

The trailer wiring #C59496 that fits your 2022 Chevy Bolt EUV does need to connect directly to the vehicle battery as this is what the kit draws power from for the trailer lights. This prevents any shorts on the trailer wiring from damaging your…

view full answer...

Answer 4

It sounds like you would like to add a trailer hitch to your 2022 Chevy Bolt EUV and need a 2" and 1-1/4" receiver. I recommend the Curt Trailer Hitch Receiver #C38DR. This Class III hitch has a 2" receiver. You will also need the…

view full answer...

Answer 5

I may have a solution for you, however, there is not an adapter available for the Curt Auxiliary LED Indicator Lights #C53201 that will increase the distance between the light bars. If you just needed more overall length of the wiring harness then…

view full answer...

Answer 6

Yes, we have the Curt Trailer Hitch Receiver #C38DR which is confirmed to fit your 2023 Chevrolet Bolt EUV. This receiver has a 2" opening allowing you to use a larger selection of hitch mounted accessories. The Vehicle Wiring Harness #C59496…

view full answer...

Answer 7

T-One Vehicle Wiring Harness #118585 will always have constant power running to it because it is a powered harness connected to the vehicle battery. The only time this is an issue is if a trailer has LED lights. Bleedover from the 12 volt circuit…

view full answer...

Answer 8

The 12V wire at the vehicle-end trailer connector being hot even when the truck is off can vary depending on the application. For all aftermarket hardwiring installations of a 7-Way wiring harness, the 12V wire will be hot at all times, even when the…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...