Help with installing a trailer hitch receiver on a 2020 Tesla Model Y

Question

Question:

Do you have any agents and or workshops in Florida or Chicago that can outfit a Tesla model Y 2020 with a hitch

asked by: Av T

0

Expert Reply:

Yes, we have several shops on our dealer locator program that are near the areas you mentioned. Click on the EcoHitch Invisi Trailer Hitch Receiver # EH39FR and scroll down to "locate installers near me". You can then enter in your zip code and find a shop to help you out with the install!

I hope this helps; I also attached a demonstration video regarding this hitch being installed on a 2020 Tesla Model Y.

expert reply by: Andrew N

0

Answer 1

Yep! I verified directly with the manufacturer that their hitch does indeed fit your 2023 Tesla Model Y, with the correct part number being the following: - EcoHitch Trailer Hitch Receiver #EH39FR

view full answer...

Answer 2

Yes, I was able to obtain the following photos of the #EH39FR EcoHitch for the 2020 Tesla Model Y.

view full answer...

Answer 3

I definitely have a recommendation for you to add both a trailer hitch receiver and wiring for your 2021 Tesla Model Y so you can haul your Wave Runner. The hitch I recommend is from Draw-Tite and the wiring harness from Tekonsha, with the correct…

view full answer...

Answer 4

Thank you for your purchase and for all of the info! The Draw-Tite Trailer Hitch #DT58MR is still an excellent choice for your 2021 Tesla Model Y and it allows you to replace that removeable fascia so you won't need a hitch cover. The only…

view full answer...

Answer 5

The EcoHitch #EH39FR for your 2022 Tesla Model Y does provide a much easier solution for removal of the appearance panel for access to the hitch opening compared to the Draw Tite #DT58MR. If you fast-forward to the 25 second mark of the attached…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion…

view full answer...

Answer 12

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…

view full answer...