Series 07 Trailer Wheel Options with a 5 Lug Pattern

Question

Question:

Looking for 5 lug trailer wheels to match up to o7 al. Wheels on f250.

asked by: Mike M

0

Expert Reply:

We have three options for Series 07 trailer wheels with a 5 lug/bolt pattern:

- Aluminum HWT 07 Series 5 Spoke Trailer Wheel # AM20456 (5 on 4-1/2 bolt pattern)

- Aluminum Sendel Series T07 Black Machined Trailer Wheel # AM25DR (5 on 4-1/2 bolt pattern)

- Aluminum Sendel Series T07 Black Machined Trailer Wheel # AM97XR (5 on 4-1/2 bolt pattern)

If this is not what you are looking for, please let me know a little more information on what you specifically need. Submitting a photo can also help for matching purposes.

expert reply by: Scott S

0

Answer 1

The Aluminum Viking Series Valhalla Trailer Wheel #AX02350545BMFL is a really solid choice for a trailer wheel that looks great but the tire size you have is a passenger vehicle tire and should not be used on a trailer. They aren't rated for the…

view full answer...

Answer 2

I've scoured my site and the internet and I can't find a tire size 175/75r13. The closest is going to be the Westlake ST175/80R13 Radial Trailer Tire part #LHWL101. If it existed the 175/75r13 would be about 23 3/8" where the 175/80r13…

view full answer...

Answer 3

The Aluminum Viking Series Valhalla Trailer Wheel #AX02350545BMFL that you referenced actually includes the sleek matching center cap (pictured below) and for compatible stainless steel lug nuts the Lionshead #LHLR103 will work perfectly. This will…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 6

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 7

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

view full answer...

Answer 8

Good morning, Cliff. As of today (3/27/24) we are expecting the #KE33JR tire/wheel combo to be in stock in about 2 weeks. Hopefully this means we can take our own pictures and put them on the site within maybe about 3-4 weeks from now. What I can…

view full answer...

Answer 9

You can add larger wheels and tires to a trailer as long as you have enough room for the larger size. The main clearance issues we find when putting larger tires and wheels on a trailer is from the top of the tire to the fender and from the inside…

view full answer...

Answer 10

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 11

To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are marked…

view full answer...

Answer 12

A BT8 spindle would have a diameter of .99 of an inch where the bearings would both install and would have a diameter of 1.24 where the great seal would ride. That would require a hub part #AKIHUB-440-2-1K for an idler hub. A BTR spindle would have…

view full answer...