Summer Starts Here - Save up to 70%
Secure this TV mount to the wall in your RV if you have the space for it so you can enjoy family movie night. Perfect for a smaller living room or bedroom in your RV, the fixed design of this TV mount gives your RV a clean, modern look.
Features:
Specs:
How to Measure Your TV for VESA Mounting Patterns
VESA is an industry standard for measurements given in millimeters used to mount TVs. Most modern TVs use this standard, but you need to know your TV's mounting pattern to select the correct mount. To find this pattern, use a ruler to measure the distance between mounting holes on the back. You can measure in centimeters, keeping in mind that 10cm equals 100mm.
This diagram illustrates the compatible VESA mounting patterns of this RV TV mount:
If your TV's mounting pattern requires a different configuration, you can use one of MORryde's TV mount adapter plates (MR43ZR - sold separately) to get the right fit. The plates are installed on the mount to adapt for TVs that call for a 300mm x 300mm or 400mm x 400mm VESA pattern. Be mindful of the mount's weight limitations.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hey everybody, I'm Ellen here at etrailer.com and we're taking a quick look at the MORryde Fixed TV Wall Mount. This is gonna be a way to mount your TV in your RV to the wall. Give it a nice sturdy spot to make sure that it's not gonna have any issues with falling. It does have a max load capacity of 50 pounds. So as long as your TV is less than that, should be good fit for you. It's gonna be pretty simple to be put on the wall.
You're gonna have this piece that actually gets mounted up to the wall, and then this flat piece that goes onto your TV. As you can see, there's all kinds of predrilled holes in this bracket. So, no matter what kind of bolt pattern your TV has on the back, this should be able to fit it. So, lets take a little closer look. This is a VESA mount.
So it will work again, with all kinds of different mounting patterns. It's got three different compliant mounting patterns and a whole mess of hardware to get you installed. So, again, no matter what you're working with, you should be able to find something, to match with your TV. But, again, basically once you have this plate mounted up, on the TV, this is just gonna go over the top. So I'm just threading these bolts out.
So I can show you basically, how that works. So these two bolts, and then one at the bottom. Take those out. So, this is mounted to your wall. This narrow piece.
You mount this guy to your TV. And then once it's all in place, you just take this on your TV, the whole thing and kind of rotate it on top of that mount. And it should stay there just fine. And then you can secure it with that hardware that you just saw me remove. So we'll have two bolts on either side and then one bolt on the bottom. So, you should be able to have access to kinda get to those bolts behind the TV and underneath to get that installed. It just takes a Phillips head screwdriver to get those in place. And that's pretty much all there is to it. I will give you a couple measurements, so you can get an idea of how big this plate is. So for the TV bracket, its about eight and 7/8th inches wide. And then, about 11 and an 1/8th inch tall. The depth, find a good spot here, is about 7/8ths inches. And then our wall bracket is about two and a quarter. And about 11 and quarter inch tall. And right about an inch deep. I know it's hard for you to see any of those measures, on my tape measure on any of those. So, I hope that gives you an idea, I won't give you all the distances between all these mounting holes just 'cause there's so many. So, I don't wanna take up too much of your time going over all that. But I think between what you got, as far as the pre drilled holes, definitely should be able to fit something in there, for just about any kind of TV or wall that you might have. That's pretty much it for our quick look at the MORryde Fixed TV Wall Mount. I hope this video's been helpful in deciding if this is the right choice for you. We do have a lot of other accessories for your RVs here at etrailer.com, so be sure to check them out. And thanks for watching..
Average Customer Rating: 4.9 out of 5 stars (9 Customer Reviews)
Secure this TV mount to the wall in your RV if you have the space for it so you can enjoy family movie night. Perfect for a smaller living room or bedroom in your RV, the fixed design of this TV mount gives your RV a clean, modern look.This TV mount is much more effective than I would have thought based on the pictures. The design is both simple and rugged. I've mounted many TVs and never done the job with less hassle.
A much more user friendly mounting bracket than what the RV manufacturer used. This Bracket comes with a large variety of hardware to mount the bracket and attach to the TV. The use of a 3/8 nut driver chuck on a drill made the installation very quick and solid. As usual the eTrailer service is second to non and shipping was quick.
Rock solid. Well made.
Very nice product and exactly what we were looking for. Fast shipping and website was easy to move around.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.