Which Front Mount Hitch Will Fit A 2022 Chevy 1500 LTD 2.7 Turbo

Question

Question:

Will this Front receiver hitch fit a 2022 Chevy 1500 LTD 2.7 turbo?

asked by: Howard R

1

Helpful Expert Reply:

Yes, The Draw-Tite Front Mount Trailer Hitch Receiver # DT44HR is confirmed to fit your 2022 Chevrolet Silverado 1500 LTD with a 2.7 Turbo.

This front mount hitch has an easy, bolt-on installation with no welding required. It has a black powder coat finish that covers an e-coat base that offers superior rust protection.

The front mount hitch has a line pull up to 9,000 pounds and has a vertical load up to 500 pounds.

expert reply by: Noah E

1

Answer 1

I sure can! The Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit - 2" #DT44HR you were looking at was manufactured by Draw-Tite with taller mounting brackets so that it would work with the the 2.7L and 3.0L engines in the new 2021…

view full answer...

Answer 2

Yes, according to our installation technicians, you will have to do some trimming to the fascia and the front air dam to install the Curt Front Mount Trailer Hitch Receiver #C31088 on your 2021 Chevrolet Silverado 1500.

view full answer...

Answer 3

I do have both front mount hitch and grille guard options for your 2017 Toyota Tacoma TRD Off Road but as you mentioned they cannot be used together and I am not aware of any grille guards that have an integrated receiver tube. Therefore, you will…

view full answer...

Answer 4

The Draw-Tite Front Mount Trailer Hitch Receiver #DT44HR will fit your 2019 Chevrolet Silverado 1500 with the 2.7L turbo. It has the taller brackets to clear the intercooler for your turbo engine. Be sure to get a Draw-Tite QSP Trailer Hitch Silencer…

view full answer...

Answer 5

I can certainly help you with that. Since the Curt T-Connector Vehicle Wiring Harness, part #C55384 is a 4-way connector the four functions will be Yellow for the left turn and brake, Green is for right turn and brake, Brown is for running lights,…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

Trimming is going to be needed on your 2022 Chevy Silverado 1500 LTD to install a front hitch, but just the air dam. There's simply no way around it, but it isn't body work really (though I suppose that depends on your perspective). For a…

view full answer...

Answer 11

The Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" #C31088 you were looking at is confirmed to fit your 2019 Chevrolet Silverado 1500 LT 4WD with the 5.3L V8. You are correct that you will need to trim the fascia to allow the hitch to…

view full answer...

Answer 12

Yes, it will so long as your 2023 Ford F-350 doesn't have dual rear wheels. It won't work with the dually models since there is a larger front mounted auxiliary cooler that interferes with installation. The EcoHitch Hidden Front Hitch item…

view full answer...