Recommended Jack For 5th Wheel Trailer For Changing Tire

Question

Question:

Hello, can you please suggest a jack to carry in my 5th wheel for tire emergencies. I bought one of those tire-aid+ but it will not lift the opposing wheel off the ground. Thank you

asked by: Dale V

0

Expert Reply:

Absolutely; for a jack you can easily carry in your 5th wheel trailer I recommend a bottle jack with a built-in jack stand so you can lift and support your trailer:

- Powerbuilt Unijack Bottle Jack with Built-In Jack Stand # ALL620471

The Powerbuilt # ALL620471 has an 11" to 21" lift range and a 6,000 lb capacity which is enough for raising just the area of the trailer where the tire is.

expert reply by: Kyle S

0

Answer 1

For a jack to use in an emergency to change a flat tire I recommend using the Powerbuilt Bottle Jack #ALL620471. This jack has a lift range of 11" to 21" and a 6,000 lb capacity which is more than enough for your camper trailer. I've…

view full answer...

Answer 2

Even with Road Armor and shocks you still place your jack like the Powerbuilt Unijack Bottle Jack with Built-In Jack Stand #ALL620471 under the axle, on the side where the tire you are changing is.

view full answer...

Answer 3

While we may have an option for you, we do not have the exact specs on your Allis grease seal part number 5013 29772. However, with the 1.6" ID and 2.5" OD measurements you provides, that is very close to our #58846. This particular grease…

view full answer...

Answer 4

The AL-KO trailer hub part number 8700 that you have is a 3,500 lb trailer hub/drum with a 5 on 4-1/2 inch bolt pattern. Based on that the #AKHD-545-35-EZ-K is the correct fit and would work great.

view full answer...

Answer 5

We have a really great kit that comes with everything you'd need to convert your 2021 Vanleigh Pinecrest 335RLP from tandem 6k drum brakes to electric over hydraulic disc brakes with the HydraStar Disc Brake Kit w/ Actuator for Triple Axle…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

In order to replace the Advent Analog Wall Thermostat ACTH11 you'll need the Air Distribution Box w/ Wall-Mounted Thermostat for Advent Air RV Air Conditioners part #ACRG15. This is a digital style replacement which is what you'll need since…

view full answer...

Answer 8

The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.

view full answer...

Answer 9

For a pair of stabilizer jacks that would have more than enough capacity that would work well on your R-Pod I would recommend the Stromberg Carlson Trailer Scissor Jacks part #JSC-24. These have a 5k capacity per jack and would do a great job as long…

view full answer...

Answer 10

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 11

The B&W Companion OEM 5th Wheel Trailer Hitch #BWRVK3700 is perfectly compatible with cushioned pin boxes like your MORryde RP072-1621HD, so the clunking you're experiencing isn't related to the two components being incompatible. With…

view full answer...

Answer 12

It's totally normal for a bit of movement between any fifth wheel hitch and the base rails. The feet on the hitch are typically a bit smaller than the slots they slide into for mounting otherwise you'd have a hard time getting your hitch in…

view full answer...

Recommended Jack For 5th Wheel Trailer For Changing Tire

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching