Replacement Brakes and Hub Components For Dexter 4,400LB Axle On a 2018 Keystone Travel Trailer

Question

Question:

I have a 2018 keystone travel trailer with Dexter axle gross wt is 4700 lbs.do you have just brake shoes for it? It is 10” hubs. Serial # 134129213

asked by: Doug L

0

Expert Reply:

Your Dexter axle came from the manufacturer with the Dexter Electric Trailer Brake Kit # K23-462-463-00 which we do not carry the shoes separately. I recommend upgrading to the Dexter Nev-R-Adjust Electric Trailer Brake Kit # K23-478-479 which will automatically adjust the brakes while you drive. This will save you from having to adjust the brakes every 3,000 miles as well as give you better braking feel throughout the life of the shoes.

We do carry the Replacement Brake Shoes Left # K71-698-00 and Right # K71-699-00 for the Nev-R-Adjust brakes.

Here are the other replacement parts for your axle.

Hub # 8-407-5UC3-EZ
Inner Bearing # L68149
Inner Race # L68111
Outer Bearing # LM67048
Outer Race # LM67010
Grease Seal # 58846

expert reply by: Bud M

0

Answer 1

The correct hub/drum for a Dexter 4,400 Lb Axle is the Trailer Hub and Drum Assembly part #8-407-5UC3-EZ and then for the brakes you can use the Dexter Nev-R-Adjust Electric Trailer Brake Kit part #K23-478-479.

view full answer...

Answer 2

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 3

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…

view full answer...

Answer 4

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 5

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 6

To tow your trailer that uses an RV style 7-way blade style connector with your semi that has a 7-pin connector, you need to construct an adapter that will also combine the brake signal into the right and left directional signal pins. This can be…

view full answer...

Answer 7

Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be 29-1/2" between the front and center hangers and…

view full answer...

Answer 8

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 9

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Answer 10

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 11

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 12

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Replacement Brakes and Hub Components For Dexter 4,400LB Axle On a 2018 Keystone Travel Trailer

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching