Replacement Fan Motor for RS-385PHC2-17100 / VD02188-00 Kinmor Vent

Question

Question:

Need a replacement fan motor RS-385PHC2-17100 VD02188-00 Kinmor13.6V 1.2A 19AB21 for camper bathroom vent.

asked by: DAN

0

Expert Reply:

The correct replacement motor for your application is the Replacement 12V DC Motor # BVD0218-00.

Attached is a review video for you to check out.

expert reply by: Jon G

0

Answer 1

The motor you'd looked at, part #BVD0218-00 is the correct replacement for your range hood. I've confirmed this by forwarding your photo to the folks at Ventline.

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

Thanks for the pictures of your roof vent lid Marty! Based on that the correct replacement is the Ventline part #BVD0449-A01 that you referenced if you wanted white or the part #BVD0449-A03 for the same smoke color you have now.

view full answer...

Answer 4

The Replacement Single Zone Thermostat for Dometic RV Air Conditioners #DMC79FR is a single zone 3 wire thermostat like the one you are describing. I have attached the wiring diagram for this thermostat and the control box below for your reference.

view full answer...

Answer 5

The correct replacement motor you would need for your V2094 Vent is the part #BVD0218-00. It sounds like you have the older version of this vent so you would also need to upgrade the fan blade as well with part #BVD0215-00.

view full answer...

Answer 6

The CC316-01 number you referred to is the original part number of the fan motor. Is it a replacement fan blade or motor you're needing? If that's the case, you'd use the #BVD0218-00-R replacement motor. If you were needing a replacement…

view full answer...

Answer 7

I've actually answered a similar question on this before and found: In my research I found that the grease seal you are looking for could have an inner diameter of either 2.24 or 2.12 inches and an outer diameter of 3.37 inches when measured with…

view full answer...

Answer 8

Yes, it will! The B&W Continuum Weight Distribution Head Assembly item #BW48FR will work perfectly with the B&W Continuum Weight Distribution System item #BW28FR.

view full answer...

Answer 9

The Replacement 12V DC Motor #BVD0218-00 is the motor you need for your Kinmore vent fan.

view full answer...

Answer 10

To replace the B2000R you'll want to use the #FVK8017-00 you were looking at, which will replace the fan blades and motor all in one assembly. For the Elixir S545A3 you'll want to use part #BVD0218-00 to replace the motor and then use part…

view full answer...