Replacement Fan Motor For Kinmore Vent # RS-385 PHC2-171BVDO218-00

Question

Question:

I have a 13.6 volt 1.2 amp 174E23 Vent Fan Motor. Part# RS-385 PHC2-171BVDO218-00 Kinmore. Trying to locate a replacement that fits without modifying the frame assembly.

asked by: Dawn B

0

Expert Reply:

The Replacement 12V DC Motor # BVD0218-00 is the motor you need for your Kinmore vent fan.

expert reply by: Bud M

0

Answer 1

The motor you'd looked at, part #BVD0218-00 is the correct replacement for your range hood. I've confirmed this by forwarding your photo to the folks at Ventline.

view full answer...

Answer 2

To add a fan and motor you need three components. First you need the motor and the Replacement 12V DC Motor part #BVD0218-00 is the one. Second the blade for it which is the Replacement Fan Blade part #BVD0215-00. LAstly you need the controls for the…

view full answer...

Answer 3

The correct replacement motor you would need for your V2094 Vent is the part #BVD0218-00. It sounds like you have the older version of this vent so you would also need to upgrade the fan blade as well with part #BVD0215-00.

view full answer...

Answer 4

The CC316-01 number you referred to is the original part number of the fan motor. Is it a replacement fan blade or motor you're needing? If that's the case, you'd use the #BVD0218-00-R replacement motor. If you were needing a replacement…

view full answer...

Answer 5

Yes, it will! The B&W Continuum Weight Distribution Head Assembly item #BW48FR will work perfectly with the B&W Continuum Weight Distribution System item #BW28FR.

view full answer...

Answer 6

Thank you for the photo! For your Ventline Range Hood PH CC0431-09 you're either going to need the motor #BVD0218-00 or the motor #BVD0218-00C. The first motor is for an unlisted range hood while the second motor is for a CSA range hood. To…

view full answer...

Answer 7

To replace the B2000R you'll want to use the #FVK8017-00 you were looking at, which will replace the fan blades and motor all in one assembly. For the Elixir S545A3 you'll want to use part #BVD0218-00 to replace the motor and then use part…

view full answer...

Answer 8

Sorry for any confusion Aaron, I can confirm that the 22" Wide Vent Hood #VE78SR is 18" deep as you can see in the picture below.

view full answer...

Answer 9

The fuse that was included with your BVD0218-00 motor is to ensure that it is up to specs for Canadian laws. If you live in the US then you can use part #BVD0218-00-R but if you live in Canada or you are wanting to use the fuse anyways then you need…

view full answer...

Answer 10

Most grills will not be set up for a bumper mounted swing arm as that location is the roughest ride on the entire rig. We don't have any bumper mounted grills. We have two sizes of griddles; 25" wide Greystone #WAY94FR, and 17" wide…

view full answer...

Answer 11

For the Ventline Range Hood part #S0721-20BD-F-1 that you referenced we do have a replacement fan motor with the part #BVD0218-00-R. And then for a replacement light bulb you'd want the #VA0415-00 and you'd be set.

view full answer...

Answer 12

For your Everchill RV Refrigerator w/ Freezer #324-000119 I believe they're referring to the thermal fuses which are internal to the refrigerator and won't be on the fuse panel with the rest of the fuses. If you refer to the rear of your…

view full answer...