Trailer Hitch For A 2022 Mazda CX-5

Question

Question:

What trailer hitch should I put on my 2022 Mazda CX-5

asked by: Lynn

0

Expert Reply:

The etrailer Trailer Hitch Receiver - Custom Fit # e98902is confirmed to fit your 2022 Mazda CX-5.

The trailer hitch has a bolt-on installation and has a matte black powder coat finish that is over a protective base coat that offers a superior rust resistance, it has an extra coating of paint to make it withstand the elements better then the other hitches.

The trailer hitch has a maximum gross trailer weight up to 4,000 pounds and has a maximum tongue weight up to 600 pounds. I would recommend checking your vehicle's manual to find the proper towing capacity for your vehicle.

I attached an installation video link below.

expert reply by: Noah E

0

Answer 1

The Draw-Tite Max-Frame Trailer Hitch Receiver part #76138 is an excellent option 2016 Mazda CX-5. In regards to installation, you will need to lower part of the exhaust but this is required for all trailer hitches for this vehicle. I know this may…

view full answer...

Answer 2

Only the Grand Touring version of the 2019 Mazda CX-5 needs to have an appearance panel permanently removed from the underside of the vehicle to install a hitch like the #76138. The standard 2019 Mazda CX-5 does not require this. Basically the…

view full answer...

Answer 3

Yes, the etrailer Trailer Hitch Receiver #e98902 is confirmed to fit your 2022 Mazda CX-5. If you have a Grand Touring model you will have an additional underbody trim piece that will need to be permanently removed for hitch installation. I recommend…

view full answer...

Answer 4

We do have the Draw Tite hitch part #76138 that is a confirmed fit for your 2022 Mazda CX-5 and would work great. This is a mostly hidden hitch with great towing capacities. Then for wiring the Tekonsha kit part #118746 is easy to install and also…

view full answer...

Answer 5

To install the etrailer Trailer Hitch Receiver item #e98902 on your 2019 Mazda CX-5 Signature you will need to remove a two foot long L shaped panel that is beneath your vehicle. I have linked a diagram I made as well as an installation video. This…

view full answer...

Answer 6

Although it makes it much easier to install the hitch when the vehicle is lifted, it can be done with your 2015 Sienna on ramps as you said. It just may be a little cramped. You want to make sure your Sienna wheels are chocked and you have the…

view full answer...

Answer 7

The Curt Pin and Clip #F-4 that you referenced is designed to work on 1-1/4 inch hitches. The reason your hitch has a 1/2 inch hole and a 5/8 inch hole is because it is setup for an obsolete anti-rattle device Draw Tite J-Pin. We no longer carry the…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 10

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 11

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 12

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Trailer Hitch For A 2022 Mazda CX-5

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching