Are Side Plates Alone Available For B&W Turnoverball Install Kit BWGNRM1067

Question

Question:

I was just curious if a person can buy just the side mounting plates for a bandw gooseneck hitch. Thanks

asked by: Matthew S

0

Expert Reply:

The side plates by themselves are not something that can be purchased separately. So to get the side plates you would need to get the entire installation kit, the B&W Turnoverball Gooseneck Custom Installation Kit for Chevy/GMC # BWGNRM1067.

expert reply by: Kyle S

0

Answer 1

For just the rail kit of the B and W Turnoverball Gooseneck Hitch #BWGRNK1067 you'd want the part #BWGNRM1067.

view full answer...

Answer 2

If you have the center section of a B and W Turnoverball Gooseneck hitch already but need the hitch part #BWGNRK1067 all you need for the rails is the #BWGNRM1067 which is just the rails of that hitch kit.

view full answer...

Answer 3

The B&W Turnoverball gooseneck hitches are different parts for a 2013 Chevy Silverado 2500 and a 2008 Chevy Silverado 2500. Both the center sections and the installation kits are different, and I'll list the hitches that fit both trucks for…

view full answer...

Answer 4

We don't carry just a hardware kit for the bolts of a B and W gooseneck hitch part #BWGNRK1313. Your best option would be to take the following list of bolts to your local hardware store so that you can piece together everything you'd need.…

view full answer...

Answer 5

According to Lippert, the correct replacement for your 9010000464 model Kwikee Revolution Steps is the Replacement Steps, Motor, and Control for Kwikee RV Electric Steps - Revolution Series #LC3725791. If you want the complete assembly with the…

view full answer...

Answer 6

We do not have replacement cap/covers available for the Camco Fold-Away RV Grab Handle #CAM42175. While it is a little hard to tell because I can only zoom in so close, but it looks like the tab that holds the cap on may be broken. This would explain…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 12

To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are marked…

view full answer...

Are Side Plates Alone Available For B&W Turnoverball Install Kit BWGNRM1067

Product Page this Question was Asked From

Continue Researching