Trailer Hitch For A 2001 Ford E450 Super Duty Cut Away Ambulance
Question:
Hi, I have a 2001 Ford E450 Super Duty Cut away ambulance. What hitch fits that frame? Thanks.
asked by: Stephen B
Expert Reply:
The Curt Class 5 Universal Weld-on Hitch w/ Brackets - 2 inch Receiver # 15903 will work on your 2001 Ford E450.
The trailer hitch has a black powder coated finish that helps resist rust and corrosion. It has a strong, secure weld-on attachment. The maximum gross trailer weight is 15,000 pounds and it has a maximum tongue weight up to 1,500 pounds. I would recommend checking your vehicle's manual to find the proper towing capacity of your vehicle.
The side brackets fit frames from a minimum of 18 inches to a maximum of 60 inches. The bracket height produces a drop of 11-1/2 inches from the vehicle frame.
All welding surfaces must be cleaned to bare metal or the weld will not be the required strength and may void the warranty.
I attached a review video link below.
Products Referenced in This Question
Curt Class 5 Universal Weld-on Hitch w/ Brackets - 2" Receiver - 60" Wide
- Heavy Duty Receiver Hitch
- Weld-On
- 18 - 60 Inch Wide
- 1500 lbs TW
- 15000 lbs GTW
- Class V
- 2 Inch Hitch
- 11-1/2 Inch Drop
- CURT
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class IV
- 1000 lbs TW
- 10000 lbs GTW
- 12000 lbs WD GTW
- 2 Inch Hitch
- 1200 lbs WD TW
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2"
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2"
- Q&A: Possible Hitch to Fit 2010 Ford E-450 Thor RV Application
- Shop: Trailer Wiring
- Search Results: receiver extension
- Video: Roadmaster Anti-Rattle Hitch Extender Review
- Shop: Front Mount Hitch
- Shop: Curt Class 5 Universal Weld-on Hitch w/ Brackets - 2" Receiver - 60" Wide
- Shop: Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Roadmaster Anti-Rattle Hitch Extender for Tow Bars - 2" Hitches - 7-3/4" Extension
- Shop: Multi-Fit Motorhome Trailer Hitch, 24" - 46" wide
- Q&A: Trailer Hitch Fit Recommendation for 2003 Ford E-450 Cutaway Chassis
- Q&A: Does Curt Trailer Hitch 14055 Or Draw-Tite Trailer Hitch 41906 For 2007 Ford E-350 Stick Out Further
- Q&A: What Is Mounting Hole Spacing Dimension for Curt Class IV Hitch # 14055
- Q&A: Recommendation for 4 inch Hitch Extender to Pull 8,000 Pound Trailer
- Q&A: Recommendation to Gain Clearance for Tailgate with Weight Distribution System Installed
- Q&A: Can a Trailer Hitch be Installed on an RV Built on a 2007 Ford E-350 Chassis with Rear Propane Tank
- Video: Hopkins Plug-In Simple Wiring Harness Installation - 2011 Ford Van
- Video: Curt T-Connector Wiring Harness Reivew
- Video: Trailer Hitch Installation - 2011 Ford E-250 Van - Curt
- Video: Trailer Hitch Installation - 2011 Ford Van - Curt
- Video: Curt Trailer Hitch Installation - 2019 Chevrolet Express Van C15320
- Video: Trailer Wiring Harness Installation - 2011 Ford Van
- Search Results: wiring harness
- Search Results: weld~on hitch
- Search Results: weld on
- Search Results: universal hitch
- Search Results: service body hitch