Recommendation for 4 inch Hitch Extender to Pull 8,000 Pound Trailer
Question:
I need to extend my hitch by about four inches so I can open my camper door past the trailer tongue jack. I have an F350 Super Duty with a 21,000/2100 pound hitch on it. So, reducing the capacity by 50 is not a problem. Im currently using a 3inch to 2inch reducer that gives me about 4 or 5 inches of extension. I need an additional 4 inches. The trailer is about 8000#. How can you help? Thanks!
asked by: Bill W
Expert Reply:
We do have a large selection of hitch extenders that will allow for the needed clearance between your tailgate and jack. The shortest extender we have available for 2 inch receivers that has the required capacity for your 8,000 pound trailer is the Roadmaster # RM-071-1075. This extender measures 7-3/4 inches from the center of the hitch pin hole on truck's hitch to the center of the hitch pin hole on the adapter. It has a 10,000 pound towing weight capacity.
As you mentioned, using an adapter like this will reduce your trailer hitch capacity by 50 percent.
Since you don't really need too much of an extension to clear the jack another good option is to just use a different ball mount that features a longer shank, such as the Convert-A-Ball # AMSC2 that measures 9-1/2 inches from the hitch pin hole to the center of the ball hole or the even longer Brophy # BH20, which has a 13-1/4 inch length. Going this route will eliminate the need for an additional adapter piece and also allow you to maintain the capacity on your trailer hitch.
I have also included a link that will take you to our available selection of ball mounts that feature a longer shank like these that you can look through.
Products Referenced in This Question
Convert-A-Ball Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Matte Black
- Drop - 2 Inch
- Rise - 1 Inch
- Fits 2 Inch Hitch
- 10000 lbs GTW
- Class IV
- Shock Absorbing
- Convert-A-Ball
more information >
Brophy Ball Mount for 2" Hitch - 3/4" Rise, 2" Drop - 13-1/4" Long - 10,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1-1/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Rise - 1 Inch
- Fits 2 Inch Hitch
- 10000 lbs GTW
- Class IV
- Long Shank
- Brophy
more information >
Product Page this Question was Asked From
Roadmaster Anti-Rattle Hitch Extender for Tow Bars - 2" Hitches - 7-3/4" Extension
- Hitch Adapters
- Hitch Extender
- Tow Bars
- 7-3/4 Inch Extension
- Fits 2 Inch Hitch
- 10000 lbs
- Roadmaster
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Shop: RV Jack Pads
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class V Commercial Duty - 2-1/2"
- Q&A: Curt Hitch # C15845 Mounting Bolt Hole Spacing
- Video: Review of Lippert Components Trailer Jack - Camper Jack - LC314667
- Shop: RV Interior Lighting
- Shop: Dometic 321 Full-Timer RV Toilet - Low Profile - Elongated Bowl - Tan Ceramic
- Shop: Roadmaster Anti-Rattle Hitch Extender for Tow Bars - 2" Hitches - 7-3/4" Extension
- Shop: Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers - 2-1/2" Hitch - 12" Drop/Rise - 32K
- Shop: Replacement Foot Pad for Lippert Hydraulic Ground Control Leveling System - Qty 1
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class V Commercial Duty - 2-1/2"
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class V - 2-1/2"
- Video: Gen-Y Adjustable 2-Ball Mount with Stacked Receivers Review
- Q&A: Can Roadmaster Anti-Rattle Hitch Extender be Used for Towing Travel Trailer
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Hitch Extender that is At Least 3-1/2 Inches Deep From Pin Hole to Inside Receiver Tube
- Q&A: Curt Trailer Hitch For 2019 Ford F-550 Cab and Chassis
- Q&A: Availability Of Trailer Hitch Receiver For 2003 Thor Four Winds Motorhome Built On Ford F53 Chassis
- Video: Lippert Components 5th Wheel RV Landing Gear Foot Pad Review
- Q&A: Installation Order For Lippert Replacement Footpad Kit # LC86UD
- Video: Review of Gen-Y Hitch Trailer Hitch Ball Mount - Adjustable 2 Ball Mount - 325-GH-1625
- Video: Review of Gen-Y Hitch Trailer Hitch Ball Mount - Adjustable 2 Ball Mount - 325-GH-1725
- Shop: Windshield Wiper Blades
- Shop: RV Covers
- Video: Roadmaster Anti-Rattle Hitch Extender Review
- Search Results: dexter screen door
- Search Results: screen door
- Shop: Suspension Enhancement
- Shop: Spare Tire Cover
- Video: Review of Lippert Components Replacement Foot Pad - LC324269