Does Draw Tite Hitch DT36MR Fit 2022 Ram 3500 Cab and Chassis

Question

Question:

DT36MR Will it fit a 2022 Ram 3500 cab / chassis? I dont know if the front of the frame is the same as a regular pickup frame. I know the rear of the frame is different. Thanks,

asked by: Kevin

0

Expert Reply:

Yes, the Draw Tite front hitch part # DT36MR that you referenced is a confirmed fit for the cab and chassis models of your 2022 Ram 3500 as well as the standard pickup truck models.

expert reply by: Jameson C

0

Answer 1

In order to trim the bumper fascia on a 2021 Ram 2500 when installing the Draw-Tite Front Mount Trailer Hitch Receiver part #DT36MR you will need to measure using the diagram in the instructions which I have attached a photo of below. That said,…

view full answer...

Answer 2

Although Draw-Tite specifically states that the #DT36MR front mounted recevier isn't a fit for Diesel models of the 2019-2021 RAM 3500 because of the intercooler and related plumbing added to Diesel models of your truck, we do offer a front…

view full answer...

Answer 3

I can tell you that the Curt #C31089 will sit fairly flush or even slightly behind the farthest edge of the front end of your 2019 Ram 2500, so it's not exactly ideal for a bike rack. A better solution might be the Draw-Tite Front Mount Trailer…

view full answer...

Answer 4

There isn't much of a difference between the Draw-Tite Front Mount Trailer Hitch Receiver #DT36MR and the Curt Front Mount Trailer Hitch Receiver #C31089 since they both have the exact same line pull and vertical load capacities. Even though they…

view full answer...

Answer 5

From both a cost and a ground clearance/approach angle standpoint I'd recommend going with the Draw-Tite #DT36MR front mounted receiver. The Curt #C31089 front hitch you'd looked at is a great item, but it would install so the bottom of the…

view full answer...

Answer 6

The Draw-Tite #DT36MR (manufacturer part number 65084) front mount hitch is actually only designed for use on the gas models, so it is not the correct fit for your 2021 Ram 3500 Diesel. The EcoHitch Front Mount Hitch #EH37FR, on the other hand, is…

view full answer...

Answer 7

There is a front-mounted trailer hitch that fits your 2019 Ram 2500 (non-Diesel models) that doesn't require modification to your truck, and will work with a hitch-mounted snow plow. I was unable to find a Fisher X2 model snow plow to see if it…

view full answer...

Answer 8

The EcoHitch part #EH37FR is a fit for your 2021 Ram 3500 as well as the Draw Tite #DT36MR (excluding diesel models). I attached a picture of the EcoHitch installed for you to check out. You can see it installs below the grille section you…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

Hi Joe, Yep, you heard correct, you can go from a 2 inch shank to a 2-1/2 inch shank with your Reese weight distribution hitch without issue. One of the following 2-1/2 inch shanks should have the right rise/drop for your application. Here are the…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Does Draw Tite Hitch DT36MR Fit 2022 Ram 3500 Cab and Chassis

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching