Can Wet Bolts Be Purchased Individually

Question

Question:

Hi, can i order the wet bolt alone?

asked by: Will

0

Expert Reply:

Yes, the Replacement Wet Shoulder Bolt # LC126197 has the same 9/16" x 3-3/8" dimensions as the wet bolts included in the Lippert AP Kit # LC52SV.

I also recommend upgrading your bushings to bronze # D014-077-00 if you haven't already as the typical nylon bushings that are usually included from the manufacturer wear away fairly quickly.

expert reply by: Kevin C

0

Answer 1

What you'll need to do is measure your equalizers in order to determine the fit of the Road Armor Shock Absorbing Equalizer Kit #LC696740. I have added a photo below that shows the measurements of the equalizers (please note that even though…

view full answer...

Answer 2

I wasn't able to find the exact length of the springs that are used on your 2018 Grand Design Imagine trailer, but for 4400-lbs axles the leaf springs we have available are the #e27SR, which are 26" long from eye center to eye center…

view full answer...

Answer 3

When it comes to replacing hub/drum assembly on your LCI axle model #LCI35-SB-86.5-68.5-NOSP-OS-L-655-7278-30PT-3-GAWR you will need The Trailer Hub and Drum Assembly #AKHD-655-35-EZ-K. The hub/drum has a sturdy iron construction and includes Inner…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

To correctly measure a leaf spring, you'll want to jack the trailer up on jack stands so the axle is hanging freely, then measure directly across from the center of one spring eye to the other, as shown in the provided diagram. The height of the…

view full answer...

Answer 6

The absolute best cushioned equalizer that fits the dimensions you mentioned having would be the MORryde ALLTREK 4000 part #MR89DR as this is only option to provide vertical and horizontal cushioning. This would make a big difference and you'd be…

view full answer...

Answer 7

Yes, going from a 4 leaf to a 6 leaf spring would add slightly to your ride height. For example, if the current 4 leaf spring has 3/8" thick leaves, and you go to a 6 leaf spring with 3/8" thick leaves, you would be adding 3/4" of…

view full answer...

Answer 8

Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…

view full answer...

Answer 9

Yes, our Dexter leaf spring part #DX74XR is the same as the part number 072-079-00. This is a 7-leaf spring for an 8,000 lb trailer axle that is 24-7/8 inches.

view full answer...

Answer 10

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Answer 11

The typical springs for the AL-KO 4,400 axles are one of two lengths. If you have the 25-1/4 inch length, then you will want the 4-Leaf Double-Eye Spring for 5,000-lb Trailer Axles #e28SR, but if you have the 26 inch springs, you will want the 6-Leaf…

view full answer...

Answer 12

For a single axle trailer, you want the shackle strap to be able to move so that you have the spring deflection needed for your suspension. Angled like the photo or even almost vertical is fine you just don't want the shackle strap to bind and…

view full answer...

Can Wet Bolts Be Purchased Individually

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching