Recommended Towing Package For A 2022 Toyota Highlander

Question

Question:

Im looking at a camper to tow behind my 2022 highlander thw trouble weight is 480 pounds would a class 3 hitch be ok or do I need the class 4?

asked by: Gibran

0

Expert Reply:

On the 2022 Toyota Highlander all you will need will be a class 3 hitch. The etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2 inch # e75ZR is confirmed for your vehicle.

The trailer hitch has a bolt-on installation with no welding required, and has a matte black powder coat finish which is over a protective base coat that offers a superior rust resistance.

The maximum gross trailer weight is up to 5,000 pounds and it has a maximum tongue weight up to 500 pounds. I would recommend checking your vehicle's manual to find the proper towing capacity for your vehicle.

The T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # TK99FR will give you a 4-flat connector and will allow your trailer's stop, turn and taillights to mirror your vehicle's stop, turn and taillights. This custom harness plugs into your vehicle's wiring harness, which is located behind the trim panel near the driver's side rear seat belt bracket. You will have to pull back the side trim panel to access this harness. The Mounting Bracket # 18144 will keep the connector stowed beneath your vehicle, near the trailer hitch when not in use.

If your trailer has electric brakes you will need the universal 7 plug wiring # ETBC7, and a Tekonsha Prodigy P3 brake controller # 90195.

The Curt Towing Starter Kit # C45554 will provide you with a 8-1/4 inch long, powder coated ball mount with a pre-torqued hitch ball; hitch pin and clip; hitch receiver lock with keys; hitch cover; and a storage case.

I attached a couple installation video links below.

expert reply by: Noah E

0

Answer 1

I recommend using a Fastway e2 Weight Distribution #FA92-00-0450 as there is not any suspension enhancement available for your 2022 Toyota Highlander XLE. The Fastway e2 will not only help to reduce rear end sag but it will also add trailer sway…

view full answer...

Answer 2

Yes, the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" item #e75ZR will fit your 2022 Toyota Highlander XSE. This hitch is custom fit and will bolt directly to your Highlander's frame with included…

view full answer...

Answer 3

Yes, the 2022 Toyota Highlander AWD, V6 with the factory hitch installed will be an adequate tow vehicle for your Kodiak 172E travel trailer. I do recommend using a Equal-i-zer Weight Distribution System #EQ37060ET as it will offer you a safer more…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Hey Travis, congrats on the new 2024 Jayco Flight 284BHS! Your travel trailer looks to have a GVWR of 7,950 lbs so I recommend going with the Equal-i-zer Weight Distribution w/ 4-Point Sway Control #EQ37121ET and pairing it with the Shank…

view full answer...

Answer 7

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 8

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 9

Hey Paul, I spoke with Curt and they stated that the Replacement Trunnion Spring Bar for Curt TruTrack Weight Distribution System #C17535 would only be compatible with the #C17499. The Curt TruTrack 4P Trailer Mounted Weight Distribution System w/…

view full answer...

Answer 10

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 11

Hey Donald, the best Blue Ox weight distribution would be the pat #BXW0550 as it has a perfect tongue weight range for your 450 lb tongue weight trailer.

view full answer...

Answer 12

Hey Antoine, so the two kits you mentioned are actually really similar and honestly I would go with the part #ETBC7 if I were you. The #ETBC7L is basically the same thing minus a couple wires and breakers so you may as well get the kit that has…

view full answer...