Does Yakima Tongue Extension Kit fit All Models of the Yakima Rack and Roll Trailer  

Yes, the Yakima Tongue Extension Kit for the Rack and Roll Trailer, #Y08109, will include an extension to connect the trailer wiring harness to your vehicle's trailer electric connection. The attached photo shows the wiring harness in the…

We have the replacement 2" x 2" Rack and Roll Tongue #8880204 but if you're needing that inner piece on the Tongue Extension Kit #Y08109 then that's only available with the extension kit so you'll need the…

When you store the Yakima Rack and Roll Trailer #Y08106 the trailer will be approximately 6' long. The tongue would be need to be removed when stored so the extension won't add anything to the store height since it'd get…

No, the problem is that the Nev-R-Lube bearings are uniquely sized to fit the compatible Nev-R-Lube hubs. That is partially why the sizes are given in metric units rather than inches. Because of the incompatibility with regular bearings in order to…

Typically, when the outside edges of a tire are showing wear its because the tires are under-inflated. The solution is to inflate the tires to the maximum pressure listed on the sidewall. Now if the outside of tires have what looks like gouges are…

We have all of the components you are looking for to turn your MicroSportXT, part #MPG460XT, into a mini boat trailer! For your rollers, I recommend the Dutton-Lainson Boat Trailer Deluxe Roller Bunk, part #DL21741. They have a 5' span so they…

The Malone MicroSport Trailer #MPG461GS doesn't have a speed limitation. However the 12 inch tires should not be run above 65 miles per hour. You could add different tires with a higher speed rating such as #TT48012C which are rated for 81 miles…

While there isn't a life expectancy, per se, of the shocks on the Yakima Rack and Roll Trailer - 66" #Y08106 and 78" #Y08107, upgrading to the HD shocks is absolutely a good idea if your gear weighs around 200 llbs and certainly…

The Dexter Zinc-Plated Brake Actuator #T47457007K does not have an access hole to insert a screwdriver to bleed the master cylinder. You will have to use the old method with a 2x4 and the safety chains. While the trailer is disconnected from the…