Tow Mirror Recommendation for 2020 Ram 1500 Laramie

Question

Question:

I have a 2020 Ram 1500 Ecodiesel Laramie and would like to add snap on towing mirrors. Can you offer suggestions on models that would fit? Thank you,

asked by: Scott

0

Expert Reply:

The K-Source Tow Mirrors part # KS80730 are a great option for a custom-fit snap-on style of tow mirror that fits your 2020 Ram 1500 Laramie. It has cut outs for the integrated turn signals and puddle lights as well is overall a very stable setup that will give you a wider view behind you.

expert reply by: Jameson C

0

Answer 1

The K-Source Snap & Zap Custom Towing Mirrors part #KS80730 is just what you need for a 2020 Ram 2500 and it has cutouts needed for the integrated turn signals in the middle of the mirror as well as the puddle lamp on the bottom.

view full answer...

Answer 2

I recommend the K-Source Snap & Zap Custom Towing Mirrors #KS80730 for your 2022 Ram 2500. These towing mirrors have an easy, tool-free snap on installation/removal. There is no tool or knob to keep track of. These mirrors will work to extend…

view full answer...

Answer 3

For custom towing mirrors that fit your 2021 Ram 2500 I recommend the K-Source Snap & Zap Custom Towing Mirrors - Snap On - Driver and Passenger Side #KS80730. These mirrors will be more secure when compared to the strap on and will also have…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

The best hitch for a 2024 Subaru Outback is the etrailer item #e25TR. This hitch is custom fit and bolts to your Subaru with included hardware. This is a class III hitch with a 2" receiver, that has a 3,500 lbs towing capacity and a 350 lbs…

view full answer...

Answer 10

The Ram OEM 5th wheel puck system, shown in the linked photo and article, was launched in 2013 so what you have in your truck is likely to be an aftermarket installation of some kind. These newer Ram trucks with the factory prep can directly accept a…

view full answer...

Answer 11

Yes, they will! The K-Source Snap & Zap Custom Towing Mirrors item #KS80710 will have no problem fitting on the stock mirrors your 2020 Ram 2500 Tradesman has. The SLT and the extendable stock mirrors are the only ones they don't fit. The…

view full answer...

Answer 12

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Tow Mirror Recommendation for 2020 Ram 1500 Laramie

Product Page this Question was Asked From

Continue Researching