Can B and W Patriot Hitch Be Installed in Bed of 2022 Ford F-250 with OEM Pucks

Question

Question:

I need to know if I can put my patriot fifth wheel hitch in my 2022 F-250 work truck with tow package without the rail system?

asked by: Josh

0

Expert Reply:

For your 2022 Ford F-250 that has the OEM puck kit you can install your B and W Patriot Hitch part # BWRVR3200 if you use the Curt rail kit adapter part # C88KR which will convert your pucks to the style of rails the Patriot needs.

expert reply by: Jameson C

0

Answer 1

In order to use your B&W Patriot 5th wheel hitch in the factory pucks on your 2021 Ford F-350, you'll need to use the Demco #DM6175 5th wheel rail adapter. The adapter will drop into your factory pucks, and will provide in-bed rails for your…

view full answer...

Answer 2

The Curt #C88KR will not work with a Husky slider hitch because the handles and cross supports sit slightly too high. They would come into contact with the bottom of the husky hitch, and you would not be able to lower the hitch all the way in to…

view full answer...

Answer 3

Yes, the Demco 5th Wheel Rail Adapter part #DM6175 will allow you to use the B&W Patriot 5th Wheel Trailer Hitch part #BWRVK3270 on a 2019 Ford F-350. The Demco 5th Wheel Rail Adapter will drop right into the pucks and then the B&W Patriot…

view full answer...

Answer 4

Because the base of the Patriot Slider sits so low in the center there isn't enough clearance for it to be compatible with the Adapter Rails for Curt 5th Wheel Hitch #C88KR. The fixed base Patriot would be a compatible option with #C88KR.…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 8

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 9

If you take a look at the linked diagram you can see the minimum recommended clearance distances between truck and trailer for 5th wheel towing. It is recommended to have at least 5-inches from the top of the bed rails to the bottom of the trailer…

view full answer...

Answer 10

The B&W Companion OEM 5th Wheel Hitch w/ Slider for Chevy/GMC Towing Prep Package #BWRVK3775 you're looking at will work fine with your new Chevrolet Silverado. This hitch has 3 height adjustments so you'll be able to set the hitch height…

view full answer...

Answer 11

I'm assuming your 2024 F-250 has the 6-3/4' bed. If that is correct, the right tie-downs are in fact the #TLF3008 and #TL77CR. TorkLift has accounted for the bed access steps on the 2024 model and confirmed these will fit your truck.

view full answer...

Answer 12

To get the B&W Patriot #BWRVK3200 to work with your 2006 Dodge Ram you're going to need a set of 5th wheel rails #DM8552016-71. These rails are custom fit to your vehicle so they'll just bolt right up to the frame. It is worth mentioning…

view full answer...

Can B and W Patriot Hitch Be Installed in Bed of 2022 Ford F-250 with OEM Pucks

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching