Trailer Hitch and Wiring Recommendations for a 2013 Toyota Avalon Limited Hybrid
Question:
Do you make a trailer hitch for the 2013 Toyota Avalon Limited Hybrid?
asked by: Richard F
Expert Reply:
Draw-Tite trailer hitch # 36540 does fit the 2013 Toyota Avalon Hybrid model. Before buying a hitch, though, please consult the owners manual and/or Toyota to make sure it is permissible to install the hitch, especially if you plan on doing some towing. I have included a link to the installation instructions for you.
If towing is an option then for a ball mount use # 36071 and pin and clip # PC2. For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258. For trailer wiring use # 118578.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Drawbar for 1-1/4" Hitch - 2-5/8" Rise, 3-1/4" Drop - 7-3/16" Long - 3.5K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 3 Inch
- Rise - 2 Inch
- Fits 1-1/4 Inch Hitch
- 3500 lbs GTW
- Class II
- Draw-Tite
more information >
Pin and Clip for 1-1/4" Hitches - 1/2" Diameter
- Hitch Pins and Clips
- Standard Hitch Pin
- Fits 1-1/4 Inch Hitch
- 1/2 Inch Diameter
- Draw-Tite
more information >
Product Page this Question was Asked From
Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class II
- 300 lbs TW
- 3500 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Installation Process for 4-Pole Trailer Wiring Harnesses C56268 and 118652 on 2016 Lexus NX 200t
- Article: How to Choose the Right Trailer Hitch Class
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Does Curt A20 Sliding Fifth Wheel Hitch Work with Reese Underbed Rail Adapter in Ford Truck
- Q&A: Recommended Tire Pressure for a Tire Size 20.5 x 8 - 10
- Q&A: Replacement Door Latch for 1999 Feather Lite 9417
- Q&A: 2014 Camry XLE Hybrid Towing Capacity
- Q&A: Wiring Instructions For A Dometic RV Water Heater Single-Panel Control Switch
- Article: Wiring Trailer Lights with a 6-Way Plug (It's Easier Than You Think)
- Article: Best Bike Racks for Electric Bikes
- Article: How to Choose a Bike Rack for a Sedan or Hatchback
- Article: Trailer Hitch Installation Tips
- Article: Which Hitches are Made in the USA