Do I Need to Lower Exhaust on 1999 Volkswagen Jetta TDI in Order to Install Curt Hitch 11070

Question

Question:

I was just curious if i am going to need to lower the exhaust on my 1999 jetta tdi

asked by: Robert A

0

Expert Reply:

In order to install Curt Hitch, part # 11070, you will need to undo the exhaust, probably just at the rearmost rubber hanger. This will provide some room to manipulate the hitch into place, and easier access to holes when tightening bolts.

expert reply by: Patrick B

0

Answer 1

If the 99 year Volkswagen Jetta was the 99.5 mid-year update then yes, a hitch from it like the Curt #C11070 would also fit a 2001 Volkswagen Jetta. If it was an early model Jetta then it would not carry over.

view full answer...

Answer 2

Both the Curt and the Draw-Tite Class I hitches for your vehicle are very similar in appearance and function. When installed, the receiver on either model would sit just below the bottom of the rear bumper. The available ground clearance below the…

view full answer...

Answer 3

The Curt Trailer Hitch #11083 and #11070 are very similar. But there is one important difference. If you look at them side by side, you will notice that #11083, which will fit your 2003 VW Jetta Wagon, has a receiver tube that is attached under the…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 7

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 8

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 9

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Do I Need to Lower Exhaust on 1999 Volkswagen Jetta TDI in Order to Install Curt Hitch 11070

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching