Cord Size On Solera 18' Replacement Awning Fabric - Blue Fade

Question

Question:

I need to know what the attachment cord diameter is where it attaches to the trailer.

asked by: Mark C

0

Expert Reply:

The Solera 18' Replacement Awning Fabric - Blue Fade part # LCV000334421 uses a 1/4" poly cord per Lippert. If your existing rail will not work with this you'll want to swap it out for the Solera Awning Rail Extrusion part # LC715216.

expert reply by: Conner L

0

Answer 1

The Solera Awning Rail Extrusion #LC715216 has an inner channel diameter of 11/32". The slot opening is 5/32" for the awing material to fit through.

view full answer...

Answer 2

Yes, you can use the Solera 18v Power RV Awning - 20' Wide #LC730523 with aluminum siding on your trailer, but there are some things you need to do in order to have the support you need with the self-tapping screws that attach the awning…

view full answer...

Answer 3

To install the Solera 18V Power RV Awning - 16' Wide - Rechargeable Battery - White Fade item #LC730492 you just need 69" of open space on the RV wall. Then it needs to be clear from the awning rail straight down so that the…

view full answer...

Answer 4

The length of wire desired depends on your vehicle connection and your personal preference. You want enough slack for turning, but not so much for dragging as you mentioned. A little extra slack isn't a problem and not enough could lead to…

view full answer...

Answer 5

The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…

view full answer...

Answer 6

A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…

view full answer...

Answer 7

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 8

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 9

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 10

Torque specs for wheel lug nuts will vary depending on the diameter of the lugs, type of lug nut and the wheel's material. The linked chart details the recommended torque for many combinations. Dexter Hub/Drum #84546UC3 has 1/2-inch studs and…

view full answer...

Answer 11

We do have 205/75R14 size radial tires that have a load range of D and a speed rating of at least 81 mph. Out of our available selection I recommend going with the Kenda Karrier #AM10235. This tire has a max load rating of 2,200 lbs at 75 psi and a…

view full answer...

Answer 12

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...