Is the H13 LED Headlights # ARC57VR for Low-Beam or High-Beam Headlights?

Question

Question:

I see this is a replacement for an H13 bulb. Is this the high beam or low beam?

asked by: Alvin S

0

Expert Reply:

The great thing about the # ARC57VR is that it functions as both high-beam and low-beam headlights.

expert reply by: Bob C

0

Answer 1

The only way to know for sure what a wire does on a vehicle is to test it with a circuit tester such as #PTW2993. This is because there is no standard for wire color and function and vehicle manufacturers use whatever color they have on hand. Testing…

view full answer...

Answer 2

You can immediately test the relay theory by simply pulling the suspect relay and replacing it with one of the others on the fuse block. If this solves the problem, replace the relay and you are good to go. You will want to consult the owner's…

view full answer...

Answer 3

The H13 LED Headlight Bulbs with Anti-Flicker Harness part #ARC57VR will work as both a high beam and low beam bulb. That said, you would need one kit for the low beam and one kit for the high beam if you were to do both. I have attached a photo…

view full answer...

Answer 4

The first thing to do is determine whether the problem is on the tow vehicle or the trailer. You can do this by using a circuit tester, like part #PTW2993, on the trailer connector and testing the pin for the running lights while the headlights are…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

I recommend installing the Firestone Ride-Rite Air Helper Springs #F2597 on your 2015 Ford F-250 Super Duty. This has a 5,000 lb weight capacity (although it only helps handle the load and won't increase the truck's weight capacity) and is…

view full answer...

Answer 7

You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…

view full answer...

Answer 8

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

While the best and most certain way to tell if your 2018 Ford F-250 has the puck system is to call your local Ford dealer with your VIN, it should be pretty easy to tell otherwise. If your bed looks like the accompanying photo - with four accessible…

view full answer...

Answer 11

Hey Dave, so the best option for carrying your carbon frame bike and e-bike is the Swagman Escapee part #S39SR with the ramp #S59SR . It has the capacity for carrying an e-bike, is rated for travel trailer use, only touches the bikes by the tires…

view full answer...

Answer 12

A junction box/7-way plug kit like Epicord #277-000141 or #HS381-9000 lets you convert the camper to match the 7-way RV blade type connector format. This avoids the extra connection points and potential trouble spots from using separate adapters.…

view full answer...

Is the H13 LED Headlights # ARC57VR for Low-Beam or High-Beam Headlights?

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching