Replacement Hub for 2002 Coleman Niagara Pop Up Camper
Question:
Good morning. I am trying to find the hub or hub kit replacement for my 2002 Coleman Niagara. I saw the BK2-100 is the bearing replacement kit but i am also looking for the correct hub.
asked by: Anthony J
Expert Reply:
It does look like the 2002 Coleman Niagara uses the standard 3,500 lb axle bearings like the ones in the # BK2-100. I recommend verifying this information first by either identifying the axle and the parts it uses using the axle tags or finding the part numbers on/measuring your existing bearings.
If that is correct, you need a 3,500 lb hub which uses these bearings and matches your current bolt pattern. More than likely you have a 5 on 4-1/2 bolt pattern right now. Assuming that is the case, you could use the Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased # AKIHUB-545-35-K. If you have an E-Z lube axle then you would need the # AKIHUB-545-35-EZ-K instead.
I have attached a link to all of our hub assemblies that match these bearings, along with a helpful article on how to measure bolt patterns for your reference.
Products Referenced in This Question
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Q&A: How To Tell If I Have An EZ Lube Axle
- Video: Review of CE Smith Trailer Axles - Leaf Spring Suspension - Square Trailer Axle - CE33201GA
- Q&A: Replacement Idler Hub for J.Q. Tex Marine Trailer With 3,500 Pound Axle
- Q&A: Recommended Timbren Axle-Less Suspension With Compatible Idler Hub Assemblies
- Q&A: Replacement For Idler Hub Using 07100 Inner and 07087 Outer Bearings
- Shop: CE Smith Trailer Axle Beam with Standard Spindles - Galvanized - 57-1/2" Long - 1.8K
- Shop: Double Lip Seal for 3,700-lb Marine Hubs
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Article: Most Popular Wheel Bearings
- Shop: Trailer Hitch
- Search Results: bearing buddy
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Shop: Trailer Wiring
- Article: Trailer Wiring Diagrams
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Search Results: lug nut
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Article: Trailer Tire Sizing
- Search Results: junction box
- Shop: Suspension Enhancement
- Q&A: What is the Difference Between Load Range C and D ST175/80D13 Trailer Tires
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Search Results: 10~36
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Brake Controller
- Shop: Fifth Wheel Hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
on Trailer Bearings Races Seals Caps
